Search results

  1. 1

    Supercharging AND Turbocharging

    There is still 30-40kPa of absolute pressure in the manifold while cruising...
  2. 1

    GT42R Turbo

    It's a little hard to tell in the first two photos, but when viewed from above, the end of the tape measure was lined up with the edge of the compressor cover. The cover is 9" across at that point.
  3. 1

    GT42R Turbo

    GT4202R Dimensions Here you go David:
  4. 1

    GT42R Turbo

    I can give you measurements if you need them...
  5. 1

    Supercharging AND Turbocharging

    Warpspeed, Forgive my ignorance, I have never seen a screw blower in the flesh. Could a decompression port/valve be integrated to reduce power consumption during cruise? Or does the layout preclude this...
  6. 1

    Project Thread Single Turbo 1UZFE VH Commodore

    I'm interested in hearing about it...
  7. 1

    Supercharging AND Turbocharging

    It is a Holden VL Commodore from Australia, the speedo is in km/h.
  8. 1

    Do you blow or suck?

    You can see a little of one of the fans in this picture
  9. 1

    Do you blow or suck?

    It's working for me...
  10. 1

    Project Thread 1UZ and NOS?

    I haven't put it on a dyno.
  11. 1

    Project Thread 1UZ and NOS?

    http://lextreme.com//forums/showthread.php?t=6338 I have...
  12. 1

    BIG Single

    Bellhousing, flywheel, clutch etc are all shown here. I got them all from Dellow in Australia, but would not recommend their flywheel, as it was badly made. They are alot more options around, have a look at what other guys have been doing recently.
  13. 1

    What aftermarket ignition wires are people using?

    I shortened the stock wires and put 8mm terminals on them to suit my 8 MSD coils.
  14. 1

    12 psi on stock 1UZFE, Is it safe?

    Forget the thicker headgaskets, get in on the standalone group buy instead!
  15. 1

    Project Thread Single Turbo 1UZFE VH Commodore

    Sounds awesome:saevil: This is just the kind of update I need to prod me along on my project.
  16. 1

    Standalone ECU Tech Edeg

    A friend of mine got an Innovate LC1 (with sensor) delivered in Perth for about $270. This was about $200 less than I paid for my techedge IIRC. http://www.innovatemotorsports.com/products/lc1.php They look like pretty good value.
  17. 1

    Standalone ECU Tech Edeg

    I use a 2CO with my Autronic SM4 and it seems to work fine. KDog, is the signal modification you refer to remapping the output to give 0-5V from 10-30:1 AFR?
  18. 1

    1uzfe in wrangler

    OP, the 1990 engine will have the thicker con rods.
  19. 1

    1uzfe help

    This forum is weird with internal links sometimes. Copy and paste it into you browser URL thingy...
  20. 1

    1uzfe help

    Your '96 probably has thin con rods, look here for more details: http://lextreme.com/forums/showthread.php?t=5065&page=3 You may want to address this before supercharging.


Back
Top