Search results

sorry for the late post, but just a correction.. methanol should be 100% or near as dam close to it eg 99% any water will "lean out " the fuel system ( ie bad) methanol has less energy per gram or Millilitre than petrol / gas thats why the extra fuel is requred.. the extra fuel cools the...

in a dynamic sistuation, there is pressure on the piston side on the valve still... dont get 100% concerned with sq area on the back side. the valve collets will show , if more spring is required..

Fopar, You tried the sucagen ( spelling) E85 ? same stuff as v8 supercars i can get that stuff @cost in 205's

lol.. how u been? i did a fair bit of testing on the .866 wrist pin vs .927 making the .866 pin thicker / and out of different materials was dearer than just using the all ready available .927 pins. some fuel harlies/ honda nitro bikes still use the .866 pins , but cost was HUGE. The larger...

lol... thanks for the entertainment.:)

hi, the EGT's are conditional on camshaft specs, installed centre line , fuel type, ignition timing, and intake air temp amoungst other things. More timing u run, generally lowers EGT's alcohole fuels run lower EGT's expect a generalized egt number only bit hard to give exzact number

??? what are you talking about?:confused::confused: any heavily modifed / performance engine ,transmission, component requires maintance or adjusting through out its service life. oem / slightly modified doesn't require the same attention..... the drag race comment you made is null and...

^^ bump for good advice:p

if you dont like Fopar's CDI there is a company here makes a balancer, with MSD SBC crank trigger wheel bolt pattern, and you can use msd 6 , msd 7 etc ignition. you will require a front mount distrubitor of sorts to phase the spark. alittle extra work, but its another option. :)

as fopar said, save your $$ on L19 head studs arp is enough sounds like you got a dodgy arp ?:mad:

if you have not bought the argo rods and pistons, save your money here you go: scat 4340 chev small journal rods , 5.7 long , arp 2000 bolts get a piston made, with .927 wrist pin ( not .866 ) this will also give you alittle more height from pin to top of piston, and get the rings into a neater...

stop talking shit.. just listern to what your saying if the shim over bucket works, why spend the extra $$$$ ohhhh thats right... you READ it some where, and now just re spit it out at any time you feel..... carry on...

yer i know :p but you got real life data ;)

$87 ? u spent that much ? :p lol.. get back to work