Search results

Hi, after finally getting my truck on the road today (all legal) I took it for a spin up the road and am not over impressed with its performance. I have a new bosch fuel pump, clean tank filter, dizzy caps/leads/plugs/rotor arms etc etc and the engine has a good service history (LS400). My truck...

Hi, thanks to many people and a lot of info on this site my Hilux 1uzfe is almost complete other than a problem with the rev counter / speedo. Because I have fitted in a R151f box from a surf I can no longer use my original speedo cluster because of the electric drive from the gearbox to the...

I have also bought a 1UZFE to R150F adaptor plate, billet flywheel and heavy duty clutch kit from Phil and cannot fault the workmanship or service provided. All emails were promptly replied to and the parts were shipped to me in record time, superb and a gentleman to deal with. Chris in England.

Thanks for the advice. Chris.:headbang:

Hi, just about finished my hilux 1uzfe transplant and am stuck on the wiring up of the 4wd controller on the back of my r151 gearbox. Could anyone point me in the right direction ? Have set up a relay for the solenoid in the glove box, just unsure of the wires. Gearbox is ex 1994 2.4td hilux...

Flywheel If u have no luck with a flywheel over here in the uk you could try Phil Bradshaw in NZ, I got my billet steel flywheel from him with a "V heavy duty clutch" to suit and everything bolts up great. I am using Hilux surf G'box in my Hilux so might be different for you if its going in a...

Hi, just coming to the end of wiring in the 1uz to the hilux. Am stuck on which wires are what on the 4wd selector solenoid on the back of the gearbox. Can anyone give me any pointers ? Cheers, Gearbox is r151 from hilux surf 3.0td 5 speed Chris.

Need more photos please and plenty !!

Thanks Thanks for the info, Chris.

Tracing wires..... Thanks for the reply sideshow, have traced wires this am, one (brown) appears to go to earth and the other two (green and grey) go to the knock sensors. The thing that is throwing me is that these two wires appear to be like a coax cable like on a TV ariel, the internals go...

Hi, just wondering if anyone could ID this part of the wiring loom for me ? Is it some kind of fuse /junction ? Thanks in advance, Chris. Loom is 1994 ls400 UK spec, now in Hilux.:yup:

Mike, as you are in the UK like me , you should try Demon Tweeks in Wrexham, that is where I got my remote filter kit from and it uses the standard LS400 filter too. Chris

Alan, as you are in the UK like me you could try Demon Tweeks in Wrexham, this is where I got mine from for my Hilux conversion, uses standard LS400 filter too.

Dyno results ! Hi, just thought I would scan a copy of the dyno sheet showing the results of my run on the dyno when my truck was still diesel powered (2.4D N/A). Cheers, Chris.

Just pm me next time your coming over this way, located on the Wirral.

Hey Fragmented, where are you located in uk ? I am in Cheshire and the 1uz hilux is about 75% done !

Jay351,yes that is an adaptor plate that goes from the stock 1uz bellhousing (with modifications!) to the r150 'box and no need to modify the gearbox input shaft either if you use the billet flywheel and associated clutch. Thanks.

Hello everyone, just thought I'd post a few pics of the work so far, slowly getting there ! 1995 4x4 Hilux 140000 miles solid front end now has 1994 1uzfe 170000 miles and 5 speed manual r150 box. Homebrew engine/gearbox mounts ls400 manifolds (it's tight) no cats and lsd from hilux surf on...

Hi, just wondering if anyone would like to hazard a guess at what the RWHP will be on my pickup after the 1uz (standard) has been fitted and re-dynoed ? 1994 1uzfe 171k miles, V good order, R151F trans 8" diff 4.556 ratio and 31-10.50-15 BFGoodrich all terrains. 2.4 N/A diesel was 65HP, 57MPH...

Just to let know, fuel pressure was 48 psi and engine is starting/running as it should. Was down to an earth wire from the gearbox loom not being connected back up when I removed the auto box and associated wiring. Thanks for the help