Search results

I have my engine in,my fault light is off with ignition on but lights up when cranking starts. The engine will halfstart, running fast wwhile cranking run for a few seconds then stop. I have 3.5 bar fuel pressure tested, but no start. the exhaust is not on only manifolds. Had a problem with the...

i have solved most of the wiring problems. my new problem is that my starter suddenly stopped turning the engine. Jan Venter

Gloverman, Thank you, of the plus minus 150 wires sticking out of verious plugs and looms i have now solved 144. Check out the old school NZ web pages, they are realy good and very detailed about the information. Thank You Jan Venter SA

Justin andrews Justin, i'm also from sa, ec to be exact. Goto web oldschool.co.za. view topic-how to wire up a 1uz engine(vvt1 and non-vvt1) This is the best wiring web i have found ever. Goodluck Jan Venter

Jan Venter, Next time you want to undo the crank pully nut, put a longish bar with socket spanner in the 10 o clock position then hit the starter. Make sure the bar wil hit the stop you supplied and nothing else.;)

Timing Belt and Waterpump Jan Venter from SA I found the tutoral exelent there was something small that differed butr i sorted it easy. Used the original and expensive belt and all the markings corresponded exactly like the tutoral. It is not a 10 to 18 hr job, its much easier, but then im...

Iam not xure what happened to my preveous writing, but the Ford Siera wil take the v8 lexus. the engine mounts of the ford fit, even the downut on the propshaft wil fit, as i see it the propshaft is to short and wwill have to be lenngtend. My problem is the wiring if anybody could help it wil be...

The ford im using is similar to the old Ford Cortina big 6 but a 92 model.Here in sa called aFord Sierra XR6. the engine bay is obout the same as a Capri, measuring it show a very tiht fit but possible. the Ford engine mountings fit nicely onto the engine brsckets, unfotunately narrowing the...

Hi, seems i am not the only one batling with the electrics. I will work it out but if some one can share their experience with us poor dopes it will realey help, so if anyone has a 1 uzfe engine wiring diagram it wil be appreciated. I will most certainly share my knowledge after the transplant...

I bought my engine with this gadget attached. I recon it must be the engine control unit in laymans terms, can any one help with the wiring on this 175000-8110. The 28P has a lot of loose wires going nowhere. Jan venter

I am new to this forum, so please be patient with me. I would also need a lot of help as i am attempting a Lexus V8 conversion into a Ford V6, starting Jan 2012. My previous project was a 1938 FIAT Topolino. Can i Attach a photo of the car as is now?