Search results

No one seems to be doing a kit. MV autos does a valve body mod for $375. I think the people who know these box's are keeping the info to themselvs. But that buisness.

Sorry to hear ya having troubles. Seemed to be good at springnats!!! Im with sideshow, check your fuel pressure and work from there....... Does it stumble after half throttle or cut out... cheers kris

Hi Hypronet. Sorry to hijack but how did you find the mv autos shift kit? I rang him today and I am going to send my stall converter and valve body to him. Will go for a 2600 stall and probly a stage 1.5 or 2. How hard does it shift. Im aiming for doing some draging but not ready to step...

Hey Neil, Just found your thread, thats a beautiful boat, well done. What wolf you running and what firmware you running, some of the latter 3d's had an updated firmware that need a change in some settings to use an older map. cheers

Hi Guys, I went to a car show on the weekend and managed to get a couple of burnouts in. Ran it on low boost and had the water injection going. Getting it dynoed in the next month or so. Cheers http://www.youtube.com/watch?v=TnqKfjOWXFE

Hey Rod, What you have said is along the lines I was thinking as I need everything I can get to help keep both inlet and exhaust temps down. The pump can handle two nozels. I was a little wary of pumping water meth mix into the front of the intercooler which could lead to a fire...

Yeah would love to catch up. Im going to springnats with the ute. hope not to break anything. Putting water meth injection on it this weekend to make it a little safer on the burnout pad. Im thinking of putting a squirter in front of the intercooler as well as one in the intake pipe. Whats...

Hey Glenn, I got a message from paul to see if I had a spare afm to test on your car. Sorry I sold it a few years back when I converted to a standalone wolf ecu. cheers kris

They are just not like us humans, oops did I say that.....

Hi, I wondering what power your making with the 440's. I have a set in mine and wondering at what power they will max out at. Cheers kris

Havent had it on the dyno with the higher boost, made 320 hp at 6 psi, now running 11 psi. quarter mph indicate over 400 rear wheel. from a 96 crown

Its up on ebay at the moment. As it dosent have an engineers report it makes it worth a lot less to a prospective buyer. Im starting advertising it at a price more than what I think the market value would be, but better to start higher and work down. Ive got $13,000 au on it but best not reveal...

Hi all, I have a new project now and would like some space in the shed. I am have my holden ht ute for sale. The ute has many modifiactions aimed at drag racing. The motor is a Lexus 1UZ-FE. It has been turbocharged with a super t70 turbo and an air to air intercooler. The engine management is a...

Mine has a cover like this one and is a late 96 model crown.

I got the rear housing from an early asin a31 which came with a mech speedo. swapped out the output shaft and fitted the different rear housing. not sure what model the bit came from.

Yeah, Id be keen.

If your going to engineer it, I would suggest a Half cut and use everything from air box thru to the cats. Will make it a bit easyer.

I think there are a few importers in Adelaide. Id suggest to go and look at the product and pick it up yourself, that way you know what your getting and nothing goes missing on the way. If its a complete front cut, ask to hear it start and run. This means that you dont get the wrong afm or...

Hi Guys, Thought some of you might be interested in this forum. For the next two weeks or so they are featuring my ute. There is a video link and short write up on it. cheers kris http://modifiedcarforums.com/forums/blog-entries/2432-featured-ride-turbo-1uzfe-powered-69-ht-ute.html

I believe Hillybilly has done the delco conversion on his HQ. Sounds like it works well now, but there were lots of problems to overcome to get it working right. Save your self a lot of problems and get an aftermaket ecu that uses standard 1uz sensors and use the tranny as a manuall shifter.