Search results

  1. krayn

    Arp head studs in Australia

    Hi all, Im about to place an order for some arp head studs in usa. I have been quoted $ 300 deliverd to my door for two 3sgte kits. Is anyone else after some as well that live in australia? Might make freight a bit cheaper. Cheers kris
  2. krayn

    Spark Plug Advice?

    I used denso ik22. Seemed ok but a bit pricey.
  3. krayn

    Has anyone ordered parts from Lextreme recently?

    Well it may be a good idea for him to remove the online shop. It has stuffed quite a few people around waiting for parts ect. But i spose no one elses time matters......
  4. krayn

    Has anyone ordered parts from Lextreme recently?

    Your not the only one!!!! I did end up getting my money back thru paypal. Seems like the spare parts department is on leave...... http://www.lextreme.com/forums/showthread.php?t=15685&highlight=aka+lextreme
  5. krayn

    Anyone know where David, aka lextreme, is??

    Thanks Justin:)
  6. krayn

    Anyone know where David, aka lextreme, is??

    Thats about what I was up to, but finding it hard to locate the part numbers. It looks like it will be two 3sgte head stud kits, but not sure? Was going to buy the lextreme head studs but first use the stem seal purchase to see how purchasing thru here was going to go. The engine is going...
  7. krayn

    Anyone know where David, aka lextreme, is??

    Hi, Thanks for that. I ended up ordering a vrs from USA ebay, http://www.ebay.com.au/itm/220737819466?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 It turned up within 7 days. Seems good quallity. I also got a set of head gaskets from another supplier.Not great quallity...
  8. krayn

    Anyone know where David, aka lextreme, is??

    Hi Cribbj, I still havent heard back from him as of yet:cool:. Thanks
  9. krayn

    Anyone know where David, aka lextreme, is??

    Thanks, Ive sent him a pm. Will see what happens. Cheers.
  10. krayn

    Anyone know where David, aka lextreme, is??

    Hi, Just wondering if anyone has heard from David? I purchased some valve stem seals from this site and havent been able to get a reply from him where they are, or if they have been sent. Tried emailing and PM but no reply. Just want to know so I can get some else where if he cant send...
  11. krayn

    Blown EA Flacon Pics

    Hey sounds good. What times ya hoping for..
  12. krayn

    Wanted WTB Cams, head studs, mls head gasket set

    Hi all, Just wondering if anyone has any of the following they want to sell: * Set of cams to suit turbo application, * Set of ARP head studs * Mls head gasket set. Thanks Kris.
  13. krayn

    Help with Head and Deck Height Measurements?

    I have a pair of pre and post 95 heads in bits at the moment, and also have a pre 95 head cut up in slices to check port thickness. The pre and post 95 heads have a slight different intake port design and have different valve springs. As far as i can tell the compression ratios differed by the...
  14. krayn

    Wanted wtd: u1 bellhousing (aust)

    i will check tonight.;)
  15. krayn

    1UZ into HT Ute

    Hi Justin, I have 440 cc injectors in it now, and i know i need to change them if im changing to e85. They were at just over 80% duty cycle with premo 98 fuel. So I thought indy blues might work ok.. I know they arn't as good as the IK2000, but priced a lot better. I aim to run a 10...
  16. krayn

    1UZ into HT Ute

    Yeah , from what Ive read e85 is the tits... I went the glide route as a dellow bellhousing came up for a good price. I have a few glide bits here as well. In hind sight, a three speed would possibly be better to get it off the line.. Im having a go at doing the box myself. Only way...
  17. krayn

    1UZ into HT Ute

    Hi, Take a squiz at pic 4. Had that much twist in that rod that the bottom of the pistons started to hit the crank as the pistons had turned about 10 to 15 degrees in the bore. I have a stock pre 95 motor here, will bolt it in to get the powerglide sorted out, then make a custom...
  18. krayn

    1UZ into HT Ute

    Ouch Found the limits of post 96 rods.... About 16 psi will do it.... Cheers Kris
  19. krayn

    Wanted Wtb rear extension housing from a341le v8 auto

    Hi, Where abouts in Vic are you? I have a complete auto for sale in Bendigo area if your interested. Cheers Kris
  20. krayn

    What did you do when the site was down?

    Cut up a head I plan on making a custom inlet latter this year. Looks like a bit of meat left in the runners.....


Back
Top