Search results

  1. A

    what did i break?

    hey great stuff being written by you here ,sideshow.. you're like a living automotive dicktionary .. things that you knew keeps on pouring out endlessly..
  2. A

    1uz Knocking Noise

    hey there I would suggest you accelerate the engine by the throttle lever to listen whether the slapping sound became more solid to your ears. i suspect something happen to your connecting rods by listening to this new video.maybe some oil sludge stuck in one of your crank pin holes and...
  3. A

    My Engine Runs . Finally . after a year .

    thanks cribbj. thank you cribbj !
  4. A

    1uz Knocking Noise

    hi there it sounds like a loose exhaust cover.. or your oil pump is not sending enough oil to its head?or you did valve face grinding without changing the shims or grinding abit off its valve tip? or you have a worn piston ring and your piston have excessive gap so it moves around sideways ? or...
  5. A

    My Engine Runs . Finally . after a year .

    Hi everybody ! my engine finally runs. yesterday night i cranked it an started right up and running like a pumping heart of a rhino.. Thank You Lextremers ... :D
  6. A

    thank you everyone that helped me..

    First of all ..thank GOD for Tonyd ,zuffen,sideshows and all that replied .. i finally have spark.. I removed the iridium plug instead of using the normal denso flat headed plug to test spark . and discovered the spark plug tip was wet with oil . because i searched the forum earlier and saw a...
  7. A

    What connectors are these? can Anybody tell me?

    Firstly ..so sorry to disturb everybody again. I need to know what these plugs does. ECU-89661-50050, 26p-16p-22p-26p. 1) there's two very identical 4 pin connectors. with the same wire colors too. one of the similar wires are the Blk/Red with 12v when switched on.. they are situated behind the...
  8. A

    What happened to my ECU?

    Hi there Sideshow i think you have your reason for being abit harsh because if one became very good and did thousands of swaps and modification one would feel like being surrounded by morons everywhere they go.. So today i check the wiring again and then probed the burn component...
  9. A

    What happened to my ECU?

    Thank you Zuffen Hi there zuffen, i saw some of your posts last time and realized that you seems to know something from just about anything. that's pretty amazing. and maybe you're in the same level as sideshow or somebody very good here. Okay I'll check out the part number of that component...
  10. A

    Parts Parting out 1992 SC400

    I'll like to buy if your ecu is still there and is 26p 16p 22p 26p .. hear from you... thanks
  11. A

    What happened to my ECU?

    as what sideshow told me sooner this day.i check the tps connector for approx 5 v and there were none. then i discovered the last 26p plug is upside down type and so i plugged in the wires wrongly and then fitted them correctly pin 4 M-rel ,pin 5 w-check engine light and pin 26 battery .. so i...
  12. A

    1uz Out of the car,no start condition.any solution?

    happy to have heard from you.. sideshow. Never have i taught somebody so experienced like you would care to reply an automotive moron like me. I was wrong i think.. Haha ..anyway It is the same motor and i never knew that by checking the throttle position sensor ,one can tell whether the...
  13. A

    Project Thread Supercharged 1UZ Bangkok Drag Truck

    hello harper your shop looks amazingly neat..
  14. A

    1uz Out of the car,no start condition.any solution?

    as you can see below.i have an ECU with 26p 16p 22p 26p ECU number is 50050. All the connectors are there except for the 4th connector that has 26p,is missing. i didn't get it from the seller and he didn't get it from his. I followed the wiring from 'Tonyd'.. one of the members here. 1)...
  15. A

    Igniters

    hi tod i have a 90 or 91 1UZ and there are 5 wires in one of the connectors and 4 wires for the other. i bought the marked 201 igniters and the only differences are its connectors and two of the wire colors from the connector with 5 wires. do mark the connectors with their igniter as you won't...
  16. A

    Your input on LS400 manual appreciated

    Thanks Hypronet Thanks for the pdfs.great to meet people like you here in lextreme.
  17. A

    How many igniters needed?

    Thank you It's so kind of you to have replied。。 such great help from you。 saves me money ,time and all the trouble。。
  18. A

    How many igniters needed?

    Hi everybody 。i got an engine 。ucf 11 。 i got the engine without the igniters ,so i bought a pair of igniters marked 201 as said in this site that you need to have a pair the same igniters 。 these 2 igniters are both mounted on one metal plate 。。so is that it? or i need to buy another pair ? so...
  19. A

    Parts 1UZ Engine bits. AFM, Igniters, ISCV's and much more! Perth, Western Australia.

    Ignitor Hi there sir , your igniter marked201 。can it be use for my ucf11 1990 ls400? are the wire color the same ?


Back
Top