Search results

try this, its where I got mine from http://store.columbiacoatings.com/cgi-bin/commerce.cgi?preadd=action&key=BMCC&reference=/cgi-bin/commerce.cgi%3Fsearch%3Daction%26keywords%3Dall%26searchstart%3D0%26template%3DPDGCommTemplates/HTN/SearchResult.html%26category%3DBMCC

Most of the powders recomend 375-400, the only thing I've seen that recomends 500 is some of the high temp ceramic paint coatings. Any normal oven should do, I'm even able to squeze 16" wheels into mine (just barely)

If you haven't already go get your self some universal metal bracket stuff from home depot. IE the stuff thats L shaped & has holes about 1 every inch. I used that to make a stand, then some wire to make a ton of hooks so I could hang parts so there were no areas where they were touching...

for an apples to apples comparsion, I looked at the EPA fuel economy for some cars that offer both a S/C model and a non S/C model of the same motor. Example number one: 2002 pontiac Grand Prix GTP vs GT (these have the same 3.8l motor). GTP city: 16mpg GT city: 17mpg GTP hwy: 25mpg GT...

Tell me about it, I live in Utah and meek by on chicken scratch because the cost of living is so cheap. I drive 112 miles a day to and from work, and this gas is killing me. I've already given up on driving the lex, it just sits at the house. I'm spending a small fortune just filling up my...

Must have been optional on sc's, beacuse my 97 doesn't have traction control.

You can still have runs in the powdercoat. If you put too much on, it can run or get bumps just like anything else. It is much easier to clean up if you do get too much on (just hit it with the air nozel and start over). Also, in the top pic it looks like they were having some trouble getting...

Is that just a simple standard screw for the drain? looks like that could be trouble if it were to ever strip out. I can't figure why companies try to shave .0001 cent from products by using cheap fasteners.

The M122 is larger than the 112's, I'm not sure if that was a typo on andrew's part, or what but I thought the 122 was on the GT40, and some of the new GM stuff (ZR1, new caddy ect).

Watch the magnecors, they're good wires but their warranty is crap. If anything goes wrong, they will blame you and your car. In fact, they started including paper work with their turbo DSM (eclipse/talon/laser) plug wires stating there was a flaw in the design of the motor that allowed moisture...

when facing the normal direction do they fit the sc with hitting frame rail? or will the need to be modded either way they face? (thinking about doing a set just to get cheap headers)

when I contacted richwood, they had this at least six months ago or more, so somebody should have one on a car by now.

Lately I've been thinking about dealing with all the supercharger fit-ment problems with some type of C5 Vette esq cowl hood. I have experience with fiberglass, and the space to mess around with a fiberglass hood something like this for our cars. I'm pretty sure there is nothing else like...

My father and I looked at a 00 Vette with the maggie charger setup, alchy/water injections, headers, other various modds. That car was a serious beast, we're talking 4th gear wheel spin.

Doesn't Subaru run their fuel lines inside the car to keep them from getting crushed when some boner high centers the car trying to be Mr. Rally driver? I can't believe some one ran some rubber **** lines inside the car like that, let alone a shop.

Does anyone know if turbo dsm (Mitsubishi Eclipse GS-t & GSX, Eagle talon ect) 450 cc stock injectors will fit into the 1uzfe? I'm parting out 2 of them right now, so I have 8 total injectors & the resistor packs for both sets of the.

I belive it was Permetex. Big blue spray paint can sized setup. Has a Thermostat housing on the can as well. Found it at Pepboys, CSK, Autozone, napa, its right by all the other permatex sprays and goop.

I too have used the spray gasket remover to take off silicone with good luck.

Is there still going to be a group buy on these? If so, you may want to post this up on some of the other lexus forums so that we can get a full ten people. I'm in for them.

They don't appear to be on E-bay yet, so I wonder who the vendor will be?