Search results

i need an engine harness it has to be off an ls400 engine The harness I need has 3 plugs.. it cant be broken cut etc etc.. i need a complete harness.. let me know what you have and what you want for it also where you're located thanks later i'm in desparate need.. PLEASE do not gauge me

that's awesome.. so can i use this harness as it is on my ls400 computer? i also forgot to mention that it enters the car on the left side opposed to the right side.. it's not a usdm harness.. can i directly plug it in and try to find out where the other wires are missing from? from reading the...

okay here's the deal my ls400 harness is cut i bought it like that i have another harness it only has 2 plugs one is a 26 pin plug.. the other is a 16 pin plug what do i do? i've taken off the complete harness on my engine and can put the other harness on my engine... unfortunately my ecu has 4...

thanks for that! that's just about the EXACT same ratio as the stock mk3 supra they come 3.93 (the lsd version).. damn.. that's what i should have used on my car.. instead for now at least i'm stuck using the 4.56 gears ... oh dear.. i think i made a mistake.. i guess i'll find out when the car...

i'm lookin around for a pair of exhaust manifold flanges i need the ones with the pattern off the head i'm thinking about putting together an exhaust manifold and i will need these let me know thanks later!

believe me i can appreciate the idea of the correct wiring harness.. i'm not a fan of bs either.. unfortunately right now i'm REALLY stuck.. so it's a celsior harness i have? i cant remember if it was a mid sump or rear sump engine i got the harness from either way i remember that the harness...

the thing is that the wiring harness i have plugs directly into the ls400 computer i have? i'm also stuck..the car MUST run in a couple weeks.. and there's still A LOT of fab work to do on it.. is there nothing i can do?

I have an engine from an ls400 the harness goes into the right side of the car.. this harness is on my engine and is cut. I have an sc400 harness.. I thought it would work for me.. i was going to take the whole ls400 harness off the engine and put the sc400 one on... problem number one.. the...

what kind of flow shoudl i be looking for? Right now the engine is stock, i'll be running the stock computer, and plan to keep just that for a while to come.. though plans do change.. i'm just looking for good reliable na power with the stock computer

the only reason i was thinking about an aftermarket fuel pump was because my tank is already mounted inside my car .. came that way from toyota!.. it's REALLY old and i figure it'll work pretty well! i had thought about a tank from something like an sc400 but it would simply be toooo much...

i'm putting this question out to all of you people not using the stock fuel pump i've basically got the engine in my car (ya i'm doing a swap with a 1uz) and i'm wondering what kind of pump to use. My car originally came with carbs.. so i'll be needing a fuel pump. will i be able to run...

it's cool i found one locally.. i'll have to find another somewhere else though because i might have 2 cooked mounts... urgh.. fak.. hopefully i'll at least be able to align stuff properly enough to make things work for now.. now i need an aw11 mr2 universal joint from the steering column.. it...

honestly i have no idea if it matters i have an ls400 engine and so i imagine i need one of those? but the part i need is the rubber liquid filled part? so that should be the same no? in any case if you've got 2 that would be helpful too? pm me your number and i'll call you up later today

hey all i need one of those rubber mounts .. i believe they're liquid filled? one of the ones on the engine i bought is busted.. and i'll need it to test fit my engine let me know what you've got i'de hoped for somethign locally.. but let me know what you have thanks! later!

did any lexus with a v8 come with aluminum calipers? I went to a scrapyard today thinking that the sc300 had aluminum calipers but was displeased to find that they were made of steel just like the ones i have.. while i hope to use these calipers (if i buy them) they may be too heavy for my...

i'm not exactly sure what's going on here i just woke up and kinda only read the title of your post i'm building something to handle a 1uz i'm using a 4 runner axle complete and from there shortening it for my purpose I'm also using an mk3 supra lsd and rear brakes of the independant spindles...

alright here it goes i'm building something i'm using a 4 runner housing and have 2 choices for my rear gears.. i have no idea what the 4 runner gears are but the mk3 supra gears have a 3.93 ratio oh.. i'm putting a mk3 supra turbo lsd into the 4 runner housing and also supra rear disks and...

what's wrong with a dellows clutch?

ah man!?.. this sucks.. lucky taco.. how far out will a long wayz out be for the r154-1uz kit?.. that's what i've been waiting for since you mentioned the idea:D

keep the truck that same colour it suits it so much better! at the same time though it IS your truck.. so paint it the colour YOU like!