Search results

What kinda hp numbers can this babe produce?

Is this flywheel just mounted outside the flexplate? Never thought of this as an possibility.

It got traction control.

Just bought a new engine, but the ecu did not follow it. The engine is from a Ls400. Think it is a 91 model.

They must have been faulty. It was used injectors from a skyline gtr.

Mine is also running very nice with the race series. But of course this is a 1uz, so no problem.

I solved the problem today. It was acutually the injectors that caused it. Installed my new Delphi 1000cc injectors and it ran very smooth afterwards. Now I'm going to tune it on a dyno on Friday. Then we will see what power the T51R can deliver on this engine...

Jibby You can probobly get a years subscription on the magazine Fast Ford for that money..

I'm having some trouble with my engine after rebuild with forged internals. The engine sometimes misfires on rpms over 3000. When the boost comes on it always misfires a bit. It seems as a 2-4 cylinders are cutting or something. But the idle is fine, and mostly the cruising is fine. Everything...

Cribbj, Are you sure that the injectors are fried with direct 12v if they are low impedance? I always thought that the resistors was there for to save the injector outputs on the ecu.

Does anyonw have a good idea where to take out the waterlines to the cooling of a turbo? And where to return it to the engine. Was thinking of drilling and taping a hole on the bridge between the heads both in front and the back.

Thank you very much guys! Sorted it all out.

The rod bolts are the arp that came with the Argo rods. Could not find any torque data with them. Thanks for the 10x1,25 data!

Do anyone know what torque to use on the arp head, main and rod studs and bolts? Could not find the correct info anywhere?

I'm thinking about trying one of these babies aswell. Hope it will not spool too late.

But the valves are still too long?

I have heard of 800hp vh45 turbo engines with stock bottom end. And I think there is a boat running twin turbo with around 1000hp.

www.nissanv8.com is a dedicated forum for the nissan vh engines. I agree that the lexus engines have better aftermarket support, and more options. (gearboxes/sump) And it is more compact. But I still think that the Nissan engine is even more bulletproof than the uz. One other thing that...

But the sc have to be of a reasonable size to not make its restriction a problem. Even if it is a positive displacement sc, it will have it's limits when it comes to flow. The best way of knowing if it is slowing down the turbo, must be to measure the pressure before and after the sc. Then if...

Thanks for that! I was hoping for an answer from you, as I noticed earlier that you had built a dry sump 1uzfe. I have this idea, making the sump with two scavenge pickups. One in front and one in the back, diveded by a "higher" section over the x-member. Reason for this is that I do not want...