Search results

I hope this link works:

justen the rb also fails after 7500 rpm. I think it has to do mainly with engine harmonics / vibrations. I have made a small movie of the 'free'play the pump rotor has on the crank and it's amazing how much. I'm sure this can cause problems. I'm redoing the waterpump on my setup as well. I am...

I checked and measured a little bit more. Also took apart a toyota V6 pump, the 1MZ-FE pump. That pump is even worse than the UZ pump. I think I can fit the JZ rotor inside the UZ pump. Some machining welding and some more machining is required. However I will have rock solid internals in the...

hi guys, I was playing with a few engines I have disassmbled here in my workshop. I got the RB26 engine, 2JZ engine and the 3UZ engine. I removed and took apart all the oil pumps. The RB oil pumps are known to crack (the inner rotor) because of the big free play this rotor has on the crank...

ok the CNC guy came in today. It's kinda holliday here in the Netherlands, most people dont work around christmas / new year. So he couldnt give me an exact price but I had to expect something in the region of 250 euro per piece. So 500 euro for the set. This is excluding VAT, but when I ship it...

yes I am trying to fit a smaller starter to allow the supercharger to sit as low as possible. Also I will make a new rotor for the waterpump and have the feed for the waterpump on the other side (inside the bank). So the whole suctionpipe and heat bridge on the front will make space for the...

well these are the first units made by a new CNC company here in my area. I'm not 100% satisfied with the design (which we made ourselves in house). The machining is perfect. Better than my other CNC address. Also I might add injector bungs first before I finish it. They will come back to me...

What do you guys think? Movie of the fabrication: http://www.youtube.com/watch?v=BBvb_lMSAyM

yes I also thought of the starter on the bellhouse but this required a lot of fabrication and also modify the tunnel a bit. I hardly have any room in the car / around the engine. The stock position is perfect for me, except I need a smaller unit. I am now trying to fab a small honda starter on...

I was also thinking of that but I dont have room there with the sump. I found a honda starter that I can modify together with modifying the block I might make it to fit. It's a difficult job but I think it will fit in the end. However the starter is only 1.0 or 1.2 kW. I hope it's powerful...

has anyone successfully installed a smaller starter motor? I need to make some space for my supercharger

http://www.atiracing.com/products/dampers/damper_dinan.htm

You can make one yourself out of ATI stuff, maybe have to machine the hub but then it's done

cant you weld a wetsump that fits your subframe?

hi Guys, I wanted to build a 3uz for myself (boosted) and I was wondering the following: How is the stock intake manifold? It has short and big runners. Will this be fine or do I remove the eight valves inside the manifold? How are the air assisted injectors? Do I keep air assistance or do I...

BigKriss, Ek spreek geen Sud afrikaans nie. :)

Vse ok, spasibo. Pishi esli kakaja pomosh nuzna. Everything fine, write me when you need help

privet, kak dela? Welcome to the forums

hardweld webcamshafts an option?

I sent you a PM, it's arnout at supras dot nl