Search results

Mudman, These guys are using 4age ITB had a ride in one sweet sound and go !!!! http://www.a1turbos.co.nz/ Regards Lambo

carby manifold hi robertk515, try this site MadPhil on here is running a Holley i believe. http://www.marxmotorsport.com/ Regards Lambo

Hi R-jay , Regarding the Computer you will use, take a look at the latest Link available, i got to look at their latest software on a laptop during our last club garage crawl, about 2 weeks ago,i think the software was ver 3.21 or something and it now supports v12 and wasted spark etc, the...

Hi R-jay, Awsome thanks for the pics, is it drive by wire can,t see any throttle cable attachment points, only tps etc on the sides of the butterfly section.Does the Bellhousing pattern look similar to the 1uz, you can probably read my mind at this point . lol Regards Lambo

Awsome Rjay, looks just like an longer 1uz, some of the parts ie power steer etc look the same, you will probably find lots of 1uz parts inside, even the layout is very similar, interesting no dizzies, awsom find gotta get one of those for my Lambo. YES YES YES Best Regards Lambo

sorry that pic is the only one i stumbled across regards lambo

I wonder what the Ford purists will think of this lol, i like the exhaust though. regards lambo

Came across this today it must be the ultimate sleeper. What next will you Aussies put a 1uz in. http://www.aussieveedubbers.com/forums/viewtopic.php?fid=59&tid=50822&action=printable regards Lambo

I had a dig on info i have on 180 headers as thats what i will use, basically the 1uz is the same fire pattern as the SBC , so you take the centre two of each bank and cross them over to the other side, as my soarer motor is rear sump i will run under the sump at the front to get across to the...

Hi guys Found this link salted away on my hard disk, it may be of use to some of you who are thinking of mid engine layout. It is in German/dutch but is still usable. http://www.dieselschrauber.de/audi_zuord.html and also http://www.dieselschrauber.de/vw_zuord.html and...

Hi David, Yes if i could produce something half as good i would be pleased, i was told the transaxel is a hewland? and by the time he got to NZ and then had to rebuild it with new parts , it now owes him $17k nz owch I believe he will mill out the excess metal in the alloy plate between motor...

and a few more hey this guy seriously knows what he's about, he is designing it from scratch.

Hi guys, I went on a shed crawl on the weekend, and thought this would be of interest, never seen a 1uz solid mounted before, it's amazing whats hidden away in Kiwi garages. Best regards Lambo

1gzfe Hi R-jay, Any new's on your V12 yet, pics. Regards Lambo

1uz To 944 Hi Guys, you may find this disscussion of use http://www.gt40s.com/forum/tech-powertrain-transaxles/19316-016-944turbo.html I have joined my 1uz to an Audi quattro and a 2 wheel drive transaxel, but it looks like to get a stronger internals people are looking at fitting 944...

hi Guys, I have a wiper motor assembly from a 91 Soarer that i dissasembled it was rhd, i would like to use it in my lambo project but cant remember which way round it goes, it is a long aluminium assembly and the motor is much closer to one of the output shafts that go to the wiper arms than...

Hi guys, Very sad news today, Australian driving hero Peter Brock has been killed while driving in the Australian Targa, the world has lost a driving legend and a great man. Rest in peace Peter. Best Regards Lambo

Hi R-jay, Thanks for the info, I will set my alarm clock for 4 weeks, by the way how do you ever get to sleep with that motor on the water. Best Regards Graeme

I did some digging the BMW is an interesting engine and would appear to produce nearly 300bhp Engine Displacement Power Torque Redline Year M70B50 4.9 L (4988 cc/304 in³) 220 kW (295 hp) @ 5200 450 N·m (331 ft·lbf) @ 4100 6000 1988 220 kW (295 hp) @ 5200 450 N·m (331 ft·lbf) @ 4100 6000...

Thanks r-jay thats the info i needed, i will check it out tonight to see if it would fit, do you have a 1gz, if so i would also like to know how much clearance it would have from the bottom of the crank pulley aircon pump etc to the bottom of the sump, i currently have my front transfer case in...