Search results

  1. R

    1UZFE into Rover P5B

    Hi Alan, I have done all the bodywork, thats why its all in different shades of primer, the interior is all done but only partially refitted. Its taken three years to get it to this stage. Its been mot'd and on the road for almost a year now, but thought i'd do the engine swap now before...
  2. R

    1UZFE into Rover P5B

    Thanks Tony, got some more, Fuel in? No idea!! bleed to header tank? No idea. Whats the thing its connected to?
  3. R

    1UZFE into Rover P5B

    Have got an engine and box out of a 91 sc400 to put in the rover, Most of the pipes have been cut so need a bit of advice on what they are and where they go I think these two go to the cars heater? This one and the banjo bolt above it to oil cooler? No idea what goes in the hole in...
  4. R

    1UZFE into Rover P5B

    Cheers Zen, I think i know where it all goes now but anything you can send me would be great. Whats the brake sense wire, and lecky load sense wire? Cheers Neil
  5. R

    1UZFE into Rover P5B

    Got someone to measure a sump position for me and the engine out of an sc400 is going to fit with less cut n shut than the ls. Next job (apart from finding a donor car) is to sort out wiring. Have read varying reports on what needs connecting to get engine and gearbox running ranging from 7...
  6. R

    1UZFE into Rover P5B

    ANYONE? Have searched all over the forum for a side on picture of a 1UZFE out of an SC or soarer with a rear sump with no luck. Has anyone got a picture please?
  7. R

    1UZFE into Rover P5B

    There are some great pictures on here of the front sump engine with dimensions, are there any of the rear sump out of the soarer, or can anyone tell me the position of the rear sump. Cheers
  8. R

    1UZFE into Rover P5B

    Thank you, 89-94 donor car it is then.
  9. R

    1UZFE into Rover P5B

    Cheers for the advice, are there many differences in the electronics and ecu between the earlier (90 - 94) and the later(94-98) cars? Any immobiliser issues?
  10. R

    secondary o2 sensor/fooling the ecu

    Zen, slightly off topic i know but how much bigger is the 1uzfe than the rover lump?
  11. R

    1UZFE into Rover P5B

    Thanks for that. Is there any particular year of car to go for?
  12. R

    1UZFE into Rover P5B

    Hi, Am looking to transplant the engine and gearbox out of an ls400 into a 1968 rover p5b. After a good measure up it looks like it will fit. The intention is to buy an ls400 and remove everything i need. The mrs will only let me have a wreck on the drive for a week, so i have to get all i need...


Back
Top