Recent content by tmiller

Not to be a party pooper , but i mouted twin ITBs on my engine and this did not make the slightest of differnce. I onsold this unit onto F40 NZ and they quoted the same result on standard engine setup with aftermarket ECU

Bellhousing Have a look at www.1uzquadcam.co.nz if your looking for a bellhousing to a w series box

If you veiw www.1uzquadcam.co.nz you will see the dyno figures of our rally car which delivers 330hp at the rear wheels. Details of cam mods online also. We have two other clients that have circut cars racing here in NZ .One with 360hp at the wheels and one at 400hp at the wheels. We...

Bellhousing Yes we have. Call Damian on Auckland 410 5468 if you would like to discuss further. Regards Tony

1UZ to Getrag - Bellhousing John We here you. We are in the process of developing a bellhousing and will post more info in time Thanks for your feedback. Tony

Mark No, that as a vehicle that i made about 15 years ago with thecar now in estate since the owners death around 10 years ago.

Lex can you please remove this posting as i have updated with better shots Thanks Tony

Guys Sorry about theissue with the pics, better luck this time. The Mountach is a New Zealand made sportscar based on a RX7 Series 1 as a doner vehicle made by a NZ company called Tron Car's. I made this car (1 of 12) and built it up from the bottom up. The car was stripped and put onto...

The Mountach is a New Zealand made sportscar based on a RX7 Series 1 as a doner vehicle made by a NZ company called Tron Car's. I made this car (1 of 12) and built it up from the bottom up. The car was stripped and put onto rotational stands where i cut out the bottom rear and fitted the...

Guys Attached is a shot of the purpose built bell housing we have manufactured for conversions between the Toyota 1UZ 4.0 V8 and W Series Gearbox. These are available via www.1uzquadcam.co.nz for $690.00 New Zealand dollars plus shipping. Or call damian on +64 09 410 5468 Regards...

The facts Guys Just to fill in the gaps , here is some history 4 u. I used to have a business called Tron cars and maufactured Lambo replica's an then a convertable called a mountach of which my car is one. The car is based on a Mazda series 1 RX7, but i fitted a series 4 complete...

1UZ 4.0 V8 Performance Parts-Eight Throttle Manifolds Yes, we have done a variety of vehicles now with exellent resuts. visit www.1uzquadcam.co.nz Regards Tony

www.1uzquadcam.co.nz Dritz/Lambo The cams are standard, no mods. The only ater market bits are the Link ECU & 1UZ"s Kick Arse Eight Throttle body setup Cheers Tony

Toyota Plenum Hi Tony here from UZ Quad Cam. I did the twin throttle body setup initially, but due to running through the Toyota plenum , really gained no extra oomph or change in power. When we did the head flowtests on our eight throttle body manifolds,the results showed us that we...

Guys, YES, we have multiple cars running here in NZ. I took a Lextreme member for a run in my convertable in the weekend who was extermly impressed with the performance. I am sure he will awnser all of your question when he hopes online. We will also dyno the car before xmas and put the details...