Recent content by the ghoul

You sir have earned your self a cookie! Where should it be sent? Turns out there were 6 bad injectors!!!! I tried hitting them with carb cleaner and shocking them like you said but I the decided "bag it" I just so happened to have a set of 6 green injectors I was going to upgrade to down the...

thank you very much... Ill go thru all the injectors tonight!

Didn't know to check; what pin and what key position. I can check it on lunch brake

Quick check, could the 255 LPH fule pump I have installed be flooding it?

Well, turns out I did wire the nutral wrong. After correcting that my friend and I were able to get it to run wide open throttle but it was missing, spitting and sputtering real bad 700rpm at best So we went thru and verrified spark at the end of each lead, we did. Then took a noid tester and...

I want to I've been handing out the promo flyers... Thanks for the info I'll check it out

Got spark from both coils, and the one injector i tested was fireing but its still not running! I bridged the two wires to fool the ecu into thinking the car was in nutral (did it in a rush so i will have to recheck) that didnt help. and in all fairness I didnt check any other injectors other...

Ok, I'll try it at lunch time. Thankyou for the help!

XD you mean sitting on top of blanket padding on top of the fender isnt a good enough ground? yep, never cought the part where i need to do that! I will be so happy if this is the case! *will that keep the injectors from triggering as well?*

talking things thru with my father at work, he explained to me how an ignition coil works, and that i indeed could be seeing voltage between the coil and distributer but all that means is i have power waiting. after i told him that i didnt see any jumps in the multimeter when cranking he said...

Hey guys; wired up a 1uzfe (jdm) with a 92 ls400 harness and ecu; I've verrified the circuit open relay, and both efi relays are working correctly. The coil to caps are both hot when ignition is on, and in start position. I don't have much more than an ohm meter for diognostics (picking up a...

sounds like a real clean way to do it, thank you!

I dont have access to a good shop that has alot of fittings on hand. The only place i can think of that has a good selection would be lowes but most of them are in bags... some one just pointed out to me that napa has a database and power steering hose making capability.... I didnt know...

Hey guys, Im getting down to plumbing my 1uz (fuel lines and power steering lines) What AN adapter fittings do I need for the fule feed and return lines? Im using the stock fuel rails for now, i believe they have banjo fittings stock? also (i know this isnt a fuel question, but id hate to...

Is that the key? i currently have a 1uz that im dumping into an 84 supra, and have an uncut wire harness from a 92 ls400. I have identified all the connections i need to make, as well as went back to the wrecking yard to pull the other 3 sub-harnesses i missed the first time, but just today i...