Recent content by pops

Trans cooler the way to go; i lost a built tranny because of a leak in the radiator. Water & anti freeze contaminated trans fluid; a dedicated trans cooler eliminates this and more efficient. pops

Saw pictures of rdm engine bay, very impressive. Keep up the good work. pops

Good Reading Thank you for a good post to site! pops

take it back Bring back and have machine shop clean it up; one little burr or scrap in oil passage or water passage and all your work and dreams are wasted. You cant possibly clean the engine as good as a prepped machine shop. This does not reflect good on their work or quality. pops I picked...

throttle by wire how will you handle throttle by wire issue?

You dont have a trans problem; no nos no problem! Nos is either a dry or wet system, if wet you could be robbing fuel needed for injectors. And there is possibility you are blowing flame off pistons.Your letting up would allow fuel and or spark to return to decent paremeters. Pinch plugs down 5k...

trans Trans is almost identical to 340e used in a supra i had;i had it rebuilt by Hypster in German town, Wisc. I am familiar yes' very knowledgable no ! Same trans ! Trans can run hooked up wrong. meaning wire loom was cut! But you will notice it in first gear no power.I ran a 396hp 7mgte...

trans Also run a ground for trans computer

3rd gear TRY RUNNING A SEPERATE GROUND FOR TRANS, ARE YOU USING RELAYS TO ENGAGE NITROS; MAKE SURE THEY ARE NOT INTEFERE WITH TRANS CIRCUIT. POPS

Looking good talk soon; i hope. Good enough to be proud of. pops

Looking good talk soon; i hope. Good enough to be proud of. pops

sleeper Talk Chris into doing my car up and we would have a real sleeper; both car and Driver.

oilers Looking Good ! Any Outstanding race engine on market has some sort of piston oiler; certainly can't hurt. Now just fasten the last two oilers and clean out the oil galley for chips and burs.I've found that heavy grease on drill bit acts as a good collector for aluminum chips. As if you...

Choosing Turbos Hello ! and I applaud you for your project first off; then I would suggest you choose a turbo that would be considered a substantial upgrade for a four cylinder project. Then when you eventually move up the boost, there will be a market for your used turbos. Don't Kill the car...

congradulations ! You gotta keep pushing ahead to get anywhere the sc400 will benefit from this promotion also i hope.