P Bateman's latest activity

Catch can frame and internals have been tacked up and test fitted. Should have it painted and installed shortly. Next comes the exhaust.

Perform a manual shift test. Unplug the valve body connector from the rear of the gearbox and drive it. Move the gear shifter manually...

In prep to build a catch can setup, I've been weighing up the pros and cons of commercially available units and most of them are crap...

I forgot to note, aluminium thickness next to the spark plug tubes is only about 8-10mm and I don't have bottoming taps - so I drilled...

Amongst many other small (but necessary) jobs, the rocker covers came off in prep for the breather system mods. The baffle plate...