Recent content by Oteck

anyone happen to know the OD off the v8 inner cv joint and PCD of the flange?

Scrap that, i need parts off the the 91 LS400 (USDM) -combination switch (signal/wiper) -Tilt sensor -Tilt and telescopic memory ecu module w/ harness

Anyone parting out a JDM soarer? Im looking for the JDM wiper/signal lever and the harness that goes to the dash/body. Also the tilt/telescopic relay and harness.

here is the sc column which looks like has a high chances of mounting

This is a weird one but im trying to get dimension of the said column from the SC300/400 that im trying to mate into an mr2 so i can retain a power tilt/telescopic. From what im seeing they look almost identical minus the lower mounting area which looks further away. i guess the accurate way to...

i had a chance to look at these, they are HEAVY as hell. the one neat thing is the mounting tab is pinch closer together so making a bracket would be simpler/doable. you may not be able to use the matching rotor since the run 6 lugs. I would try to find supra or ls400 calipers before going with...

sorta off topic but can anyone give me some hard numbers on the rotor specs? to be accurate the disk thickness, i can't rely on these 1.25" as its to vague/innacurate and the difference is significant 30mm vs 32mm. I have a pair of mk4 supra n/a rotors here and measured to 32mm, other sites...