Recent content by Mcgee

There i a 1UZ VVT engine available at http://www.adelaidejap.com.au/toyota.htm $1850 or something like that.

Hay edz, Good to see your back on the car build again. If you need the TIG give me a yell (Could come in handy with the sump or exhaust). Furthermore are you keeping the thing on Petrol or converting to LPG. Bryan

Lex, I think with a turbo engine you can take VE out of the equation. Or at least on boost it will be 100% or greater. so at the desired rpm 6200 im sure the turbo will be on boost so VE will be greater than or equal to 100%.

Lpg Thats correct. I've helped a mate do a 355 stroker using two impco carbies. edit: had two VG30 turbos hanging off the side. We spaced the converters to flow more gas until we could get it tuned on the dyno. Also first problem was that the mixers were vented to atmoshpere. Which ment when...

Whats the Price???

smooth walls "Polishing decreases resistance. The smoother the surface, the more minimal resistance becomes. Lowering or eliminating resistance will always increase your air flow." Problem is in tube flows, like an intake or exhaust is that a polished wall increases the boundary layer...