Recent content by lsk12

hi ive got a link on my 1uz with w55 5spd stock headers with 3inch y pipe and pod and im getting 253hp at the wheels

Yeah done that already it goes really well to. 253 hp at the wheels 1160kg and a chuckable chassis what more could you want? Im hoping for some 12sec 1/4s this season I think its got the power just need the traction. L

Hi Guys I had my 1uzfe s13 Silvia on the dyno for some tuning in the weekend at NZEFI a new tuning shop here in Christchurch NZ. They were really professional and managed to squeeze 252.6HP at the wheels out of my standard 1uz. It has a Link computer a 3-inch exhaust and a pod filter. The torque...

A dry sump sounds very expensive I think Ill whip up a sump guard for it to stop those curbs on the side of the track from knocking a whole in the sump. Ive been thinking about transplanting everything into a fd rx7 has anyone ever done this? L

I took my 1uz v8 silvia to the track to give it its first taste of drifting. Before I took it out I weighed it at the rubish dump it cam in at 1160kgs in full street trim with half a tank of gas and no driver. I think the standard weight for a ca18de silvia s13 is about 1170kgs so Im not doing...

No but it hangs pretty low and youll need to find a front sump 1uz in order to clear the x member

Hi sounds like a good swap I think there would only be room for turbos if you brought the exhaust foward and placed the turbo in the front corners of the engine bay where the battery and air box used to be. Im still thinking about turbos but I might just go with a shot of nos to get a 12 sec 1/4

Yeah the altitude is fairly low about 50 meters above sea level at a guess the radiator is the standard ca18 s13 nissan silvia unit It has the same dimensions as an r32 turbo skyline one which is twice the thickness so Ill put one of those in eventually. The max temp so far was goin up a hill...

I havent had it on the dyno yet so im not too sure about power but Id have a guess and say its pumping 210hp at the wheel??? thats just based on what others get with similar mods Top speed was 100mph Id be interested to know what others have got out of their 1uzs as Im shooting for a 12 sec...

Hey guys Ive got some pics for you. I just got back from Ruapuna there was a big drag meeting there so I gave it a run down the 1/4 mile With a locked R200, tein coilovers and 205 60 15 road tyres it ran a 13.8 1/4 with a 60fty time of 1.8secs theres alot more left in the launch as it will...

Hi ok Ill update you on where Im at last weekend I got the engine running in the bay it sounds very cool. Ive since taken it out to finish the mounts and get the clutch working. The shiter on my w55 came out too far foward so I swapped the shifter with one that came out about 10cm further back...

Ok here are the pics hopefully you can see whats going on Note: It hasn't been welded up yet. The trick is getting a ball joint from a car and then finding a bolt with the right thread to screw into it. The ball joint then mounts to the top of the trannie tunnel and the linkage runs foward...

Hi It could be something about putting them in Nissans as Im doing the same thing with my s13 silvia. My dad works for a company that makes lotus sevens and hes shown me how to make a shifter extension. I have most of the parts made I just need to weld them up. This method has been proven to...

Ive got the motor and box mounted now unfortunatley the shifter is about 25cm to far foward so ill have to make a remote shifter but thats not too hard. Its just the wiring to go before I can start it up cant wait to hear it. Does anyone know what style of exhaust sounds best? ive heard a...