Recent content by icespy2

Thanks Sideshow, Not only did Sideshow fix my car he also wired up my tacho to my 4cyl interface. He diagnosed my problems in about 20 mins, and took him about another 20 to fix them. My diagnostic engine check plug / loom had been deleted from the wiring but Sideshow still managed to obtain...

After all my troubles, money and time spent with mechanics, auto electricians and mates or forums, i can only highly reccomend 2 people. SIDESHOW (sss automotive) in NSW Sydney. or SCOTT HAMPSON (venom custom fabrications) in QLD Brisbane. Scott wired my factory ECU / Loom and Sideshow...

Yes, my mistake, live and learn....expensive lesson. Sideshow can you please give me a call when your comming up so we can arrange a time/day for you to fix my truck. Its a 4 plug ecu 92 front sump celsior engine. plugs;- 34/22/16/28, i dont think these are very common like the crown 3 plug...

Yes.. ECU problem alright! the auto mechanic that wired up the ecu has totally ballsed it all up, he has wired the fuel pump to come on permenatly when the reds are on, the isc valve is stuck wide open all the time, he has not wired the speed sensor up (looks like i might need one off my speedo...

Bugger, turns out it isnt a cam tooth out. I have a mechanic looking at it now, he says he will find the problem, but i will give him a week or so until you (sideshow) come up to the coast and if he hasnt found the problem by then i will surely let you try to solve it for me. I will post you my...

cam belt Is it possible that i HAVE missed a tooth out on the cam belt/timing belt? symtoms seem maybe to be pointing this way.....i hope,... as it will be an easy fix, means my auto electrician has done a perfect job, and was just my stupid mistake. Dam im really hoping this is the problem as...

will give it a try and ask sparky if he has wired the cold start injector up. thanks for your imput

I have a 92 celsior 1uzfe in a 84 4runner. I have replaced the caps,rotors, timing belt, plugs. I was 99% sure i reassembled the belt back on correctly. I have had the engine smoke tested and it has no air leak as per this machine test. I have replaced the AFM, drivers coil, fuel press reg. I am...