Recent content by fordgt

Forgot add its been made with a bearing setup not the std pumps shaft as it looks in the picture. its just a NSK bearing ya can get from, but its still in good nick

I've got a idler layin around at mine in alexander heights... ya can use your std belt on it and is good for clearance too can have it for $50 need to grab it by friday as I'm flying up north

Pair of log style manifolds $100 one side with heat shield

Mainly coz of the Four 10" fans drawing about 8-10amps each and the hydraulic fan should pull alot more air threw the radiator... cooling is struggling on a hot day and at low speed or pushin it on the sand

93-94 v6 camry hydraulic fan ecu should do the job too

under the dash on the right hand drive ls400 half-cut i had

Chasing hydraulic fan ecu to control hydraulic fan on my 1uz hilux swap, getting rid of the electric fans

Forgot about the twin cats too that are in there

Here's my Surf ECU: EMS 8860 Exhaust: Custom made extractor (ceramic coated) then 2.5" twin into a single magnaflow muffler and 2.5" twin outta magnaflow muffler all in stainless steel http://au.youtube.com/watch?v=1XfOXp-ejKc&feature=channel_page...

Yep its going great all wired up and running sweet.. only little problem was that i had to swap two wires around on the stepper motor to get it to go in and out the right way

About what temp should ya start to be getting worried with theses motors mines running about 87-88 on the road and at lights but i've got 2 outta my my 4 fans running

Well when I did the research I could only find two places at the time CRS and Dellows... 1st off I was very happy with the kit and time it took to get.. but when fitting the bellhousing one of the bolts on the gearbox had to be counter sunken because it fouled with the bellhousing which i...

Yep like you said give it abit in 2nd and it slips... havn't even been 4wding yet!! Don't really wanna swap flywheels over and stuff just looking for a clutch that fits the dellows flywheel (have a feeling it might be a holden clutch), maybe I can buy another and get it beefed up so the cars...

Yeh already checked that, theres heaps of play there and at the pedal but i see where ya coming from and why ya mentioned that

I'm running a dellows bellhousing and flying setup on my R150f gearbox on my hilux 4wd, also went with there clutch they supplied which hasn't been very good so far and is slipping... So yeh just trying to find out what clutch to go with and what clutches would fit off which cars? Btw: the...