Recent content by evoman1

do you keep t/b on the plenum itself or fit it down the the original intake hole under the drivers seat

ok i will try that tomorrow thank you, you would'nt be interested in doing any front sump conversion in the future as rear sump are slowly getting harder to find..... i fabricate very good cross members for this conversion, i could send you one to try to see what you think?

ok thanks kelvin, i had a wee felling it might be a earthing issue, i still have the original loom off the old 3l trans, so do ya think it would be easyier to splice that loom up and plug it back in and tee the wires back in to speed sensor no'2 near the sensor of just do i near the ecu?

and i think i got the right wire off the 1uz ecu, it should be a purple with silver tracer? or do i need to find both speed sensor pos an neg??? also for some reason the temp sender unit make my temp gauge shoot right up to the max ... any thoughts?

it was a 2.8 auto van gloverman, this is the very last thing i need to do and its got me!!

hi people, i have finished my hiace and been for cert but failed on drive shaft loop and no speedo(which i did know about) every thing else is working mint drives like a dream but i cannot find any info for my speed sensor output on my ecu so i can make it work, any diagrams i have found i see...

my cert man just said make it out of 50 x 6 flat

ullrich alluminium or steel and tube stainless, they have mandrel bends

and i just used my factory hiace tank and fitted a intank pump into it...easy!

mean!! i not long finished mine, failed cert as had no driveshaft safety loop damm it!! youll love it they are so awesome to drive lol, i bunged all mine up as teedo said but i used factory ecu so had to plumb that big hose off the front of the plenum back into the intake pipe you will have...

that intake is ideal!!!!!! thanks very much fella you just save me alot of time trying to nut that out!!! will post more pics this sunday after working on it all weekend, hopefully i will be all done and it will be off to my sparky buddie, 2 full weekends and all done!!! yuss cant wait to hear...

i dont see it sorry??

hey there! my hiace was auto so just keeping it simple as possible and using the 1uz auto trans, should be ideal for towing :-)

hey there all again!! all done for the night and got a fair bit done today, last night pressed up new cross member to take front sump 1uz and had enough time to make mounts aswell. gave them a paint today and fitted them up looked good!. dropped engine back in the hole for the last time...

hey there all!! as i posted on here awhile ago i said i was about to do this conversion to my hiace as the 2.8 deisel did'nt cut the mustard towing my race car so hopfully this will make my 3hr drive to events take 3hrs not 5hrs!! brought a celsior complete front cut so i have EVERYTHING i...