Recent content by datjas

  1. D

    1UZ-FE LPG (carb manifold/EDIS/ditch ECU)

    Hi yes the man I used is John Harcourt. He is Old school I had to wait till he was at his sons business to process my purchase with a credit card but a nice bloke.I probably waited 2 weeks to get the purchase under way and 3 weeks tops for it to arrive. 00116433497263 is his number with the...
  2. D

    1UZ-FE LPG (carb manifold/EDIS/ditch ECU)

    Hi i got myself a 4 barrel manifold from a guy in new zealand,Its a very nice cast four barrel manifold but does owe me $900 landed,I looked at turning my stock manifold into a tunnel ram of sorts but it was going to be too high.
  3. D

    serpentine tensioner pulley

    HI mate it is a 6203 which should be 40mm diameter outer x12 x17
  4. D

    1967 glastron 174 1uz conversion

    Hi All i know many will burn me about this but after some trouble with my e.f.i setup i found a cheap harcourt manifold and adapted a distributor.Sorry alan i never got on to you message me again if you want me to give you a call. Ive been so busy and caught up trying to finnish the boat.Im...
  5. D

    microtech,

    Checked grounds ect,sent cpu to microtech for testing and hopfully repair
  6. D

    microtech,

    Hi yes its been doing it the whole time.I even thought about r.f.i so have ran new pairs of wires to the sensors with shielding
  7. D

    microtech,

    microtech not showing rpm properly
  8. D

    1967 glastron 174 1uz conversion

    will call you after the easter weekend
  9. D

    1967 glastron 174 1uz conversion

    No worries will do
  10. D

    1967 glastron 174 1uz conversion

    Sorry has been i while since i have been on.no worries at all,happy to swap notes or welcome to come have a look sometime
  11. D

    Wanted Marine manifold

    Marine manifolds 1uz in australia,im in Queensland Gold Coast,Happy with rolco style logs or anything else considered.I know where to get them new just thought id give this a quick try.
  12. D

    Microtech wiring help older LT8 please

    Hi i have run the engine now must be twin dizzy set up!! One new problem is the engine ran a little funny so i changed the polarity of the crank and cam sensors and the idle is much better,at the moment im only starting and running for a short time as the engine is not fitted as yet.But the...
  13. D

    Wanted top idler pulley

    bummer ill try to get one locally first thanks though
  14. D

    Wanted top idler pulley

    hi all im after top idler pulley for 1uz will pay postage and price of coarse!!
  15. D

    Microtech wiring help older LT8 please

    Hi ,yes the fella that i finally got a hold of from microtech feels the same.Ill post when i have luck with the outcome.


Top