Recent content by AL510

  1. A

    Looking for a step or 2 colder plug for nitrous sc400 vvti

    this is 2 steps colder and is what i run with the 150 shot.
  2. A

    Looking for a step or 2 colder plug for nitrous sc400 vvti

    I used a NGK R5671A-8 in mine but mine was a non vvti. This was the plug recomended to me by my tuner, it is a non projected nose plug. Cheers, Al.
  3. A

    How about just a 75-100 wet shot on a 98 vvti v8?

    Hi guys, I have run a 150 wet shot on a late model 1uz with the skinny rods without a problem.in a hilux it ran a best of 11.58 at 112 over the quarter with slicks and launching with the gas as i went full throttle. cheers, Al.
  4. A

    Single turbo 1uz

    definately pre 94 with the stronger rods. cheers, Al.
  5. A

    Single turbo 1uz

    Hi guys, if you check your fuel rails pre 94 are machined billet looking rails and post 94 with the skinny rods are a cast fuel rail. cheers, Al.
  6. A

    Comparative 1UZ Piston Weight

    piston weight I have a set of ross forged pistons 8.5 compression and the paper work states 363 grams. cheers, Al.
  7. A

    Wanted 1uz

    Hi Nath, do you still have this?
  8. A

    3UZ & NOS?

    nitrous. Hi guys, i have been lurking for a while and find a lot of useful info here. I currantly have a 98 hilux with a late model 1uz with the skinny rods.I bought this motor befor i new any better. I have had about 15 quarter mile passes with this setup and am currantly running a 100 horse...
  9. A

    Trade Front sump for rear

    sump Hi Yarno, Check your pm's Cheers, Alan
See more


Back
Top