Recent content by 1uzdrift

thought i'd throw up a few vids of the rx7 http://youtu.be/cLJin44dhMA http://youtu.be/dm03NMCIQ34

I made this up myself from the factory lower intake, but i'm going to make another from scatch so i'll let you know a price when i get one done.

1uzrx7 northern ireland hello lads jus found! i'm almost finished this, just the steering to do now. http://www.youtube.com/watch?v=cLJin44dhMA

i'm almost finshed mine, fd3 with 1uz with m122, where in the uk are you from?

cheers lad, i didn't even notice that! i'll take a few more pictures, the steering is causing me a few problems, i need to get it sorted before i can go drifting!

I've finally got this running! still a few things to do, the tensioner is to weak and the belt is slipping so only making 1bar boost, the intercooler is doing a good job as the intake temp is 35degrees, dont have any power figures as it would catch grip over 2000rpm on the dyno...

thanks for the info, i'll have to look into that, I had a water leaking from behind the water pump so i am replacing the timing belt when i have it off, I called the local toyota dealer to price a belt for a toyota celsior, but he hadn't even heard of one, off to a good start!

I'll try it and see, if its too hard i'll have to find some way around it, i could use a larger master cylinder off a van to give me more leverage.

I'm not sure what the clearance is exactly, i'll measure it some time, but i'd guess at about 10mm each side, its pretty tight!!

now for the fun stuff, the clutch master cylinder was in the way of the engine as was the brake booster, so i ripped them out and butchered them the master cylinder now lives inside the firewall this was hitting off the rocker cover so had to go...

hello lads, i've been working on this for a while and i'm finally making progress, i'm not a mechanic or engineer and i've done most of the work myself so its a bit rough! but as long as it works i'll be happy!! this is the car before the rotary went pop making the inlet manifold this...

I thought I was the only one in the UK(northern ireland) building a 1uz FD!!! is this a daily driver or track car?