3uz

  1. B

    s/c 3uz into is200

    hello all, i have big plans for my is200 i want a 3uz and eventually supercharge it, would there be any way to mount the engine low enough to fit an eaton m122 without cutting the hood? thanks
  2. DZM

    3UZ Stock Piston Limits

    What boost have people reached on stock 3UZ pistons? Im building a 3UZ with early thick rods and arp head studs, rings gapped for boost and full rotating assembly fully rebalanced. Will be running a Holset He400 Turbo. Engine is on Megasquirt MS3. will be running 99ron pump fuel. Aiming to...
  3. George_R

    Lexus IS250 to 3UZ-FE (completed)

    Two recent projects of mine, 3UZ-FE 6a/t to IS250 Both of them feature fully functional instrument panel, a/c , push start and most importantly TRC & VSC systems. Other key things to mention are stock looks both inside and outside, clean wiring etc Old demo clip of the 1st car's VSC...
  4. George_R

    Trade 1UZ VVTi / 3UZ / 2JZ stock ECU conversion for M/T

    This offer is a device that eliminates limp home mode, which is otherwise active if ECU does not 'see' stock auto transmission. Earlier ECU models (1UZ non-vvt, 1jz, 2jz before 1998) didn't have "underpowered" fuel/spark/vvti (for the JZ) maps for N/P transmission range, so these ECUs are...
  5. J

    DBW Throttle Issue

    I'm doing a 3UZ transplant, and the donor had a funny issue. It runs, but if you stab the throttle it coughs and bogs. Engine is now running independently from the body loom, and having pulled the inlet snorkel off, it's apparent what the problem is. The engine will progressively rev, all the...


Top