Recent content by BigEv

  1. B

    92 Lexus SC400 Part out...

    I'm after bellhousing bolts and torque converter bolts. Pm me price pls
  2. B

    Newby looking to fit 1UZ in Bundy

    You can buy off the shelf adapter kits for the following: 1uzfe TO t700 from castle main rod shop. T700 TO hilux transfer from locktup4x4, low range offroad. Or overkill engineering can make an adapter from the factory auto to what ever you like. The t700 has a good 1st gear ratio and...
  3. B

    Newby looking to fit 1UZ in Bundy

    Hey Paul. The biggest problem is actually doing the adapter to the transfer case. Is his intended use just for road or what? Like I mentioned I ran the rover lt230 transfer as ther are strong and have a great low range ratio. They are a constant 4wd transfer tho so it has a center transfer lock...
  4. B

    Newby looking to fit 1UZ in Bundy

    Hey got the above txt. I have a bundy with a 1uz in it. I kept the stock auto in mine for 3-4 years. I had it adapted to a rover lt230 transfer. I have to question tho, why do you want to keep the factory auto? Do you already have an engine etc? Evan
  5. B

    Auto shifters for stock auto?

    I'm looking for shifter options that are compatible with the stock auto behind the 1uz. I had a bnm at one stage and the ratio is wrong and couldn't get every gear. I love the gate shifter behind me c4 but unsure if there are aftermarket options for the toy auto? Any help?? Cheers
  6. B

    Stock bottomend N/A 1UZ- Kelford 207-Es, ITBs, etc etc- What to expect?

    I was looking at these as I'm hoping to get an intake off the same place! http://ttcperformanceproducts.com/ttcpeibero1u.html
  7. B

    Stock bottomend N/A 1UZ- Kelford 207-Es, ITBs, etc etc- What to expect?

    YES!!! this is exactly what I'm after also! I have a question to throw into the mix. If I was to do similar, I'm looking at a Ttc intake , cams, valves, springs, port and polish top end then say rods and pistons would it handle a shot of NOS? I'm putting it into a 4x4 race buggy and need to...
  8. B

    NOS.... who is running it. need some help

    hey, im planning a build on my 1uz engine. its going in an offroad 4x4 buggy and im after some info on running NOS. ive never worked with it before and any info would be good. as for the engine im looking at building in 2 stages. top end being valves/valve springs, ported polished, cams and...
  9. B

    Performance upgrade?

    How do these engines handle NOS? im building a offroad 4x4 buggy and need power and need to keep it N/A. NOS shots for straight runs?
  10. B

    1UZ ITB Setup & Two Fuel Rails.

    Are you interested in international shipping?
  11. B

    Performance upgrade?

    The upper or lower section of the manifold? Going itb Would rid the top section? What options are there for the lower?
  12. B

    Performance upgrade?

    Can you go too big when upgrading throttle bodies? There are plenty of 80mm, 90mm and 100mm universal throttle bodies on eBay
  13. B

    Performance upgrade?

    Umm not too sure prob just more of what its got! Its going into a 4wd buggy that will see low speed crawling and will get opened up for speed.
  14. B

    Cooling for a buggy

    Hey ethann, i know of a guy running a 1uz in a Truggy, he is running an alloy radiator about the same as a falcon radiator with the falcon twin thermos and it works well. one thing to think about is that social driving etc it will be running for a while and in summer it will be harder to...
  15. B

    Performance upgrade?

    Or would I be better off going an oversized throttle body or dual big ones?
Top