Hello all,
Am wanting to start working on my exhaust and looking for the 3 bolt 1uz cat flange. I have a shop that can water jet ss for me.
Thanks
Charley
Hello,
I see that you are very familiar with 1uz/r154 conversions and I am wondering if you know how much clearance there is between the auto bellhousing and transmission tunnel on the sc400?
The reason I ask is because I wonder if my r154 hydraulic issues are related to the bleed line exiting...
Ive Read on people trying to remove sludge, but what about the soudge breaking off and clumping up the oil pickup? Thats the only reason why im nervous if there is sludge
Charley
Ive heard of people using the diesel trick where they fill the motor up and let it sit for awhile( maybe 2 weeks or...
So i finished an r154 swap on a 1uz about 1 month ago. But ever since ive finished ive had a problem with the hudraulics or tob. Im using the quantum auto kit, with tilton 61-400 tob. My brother and i have bled the system about 20x or so and...
So here are the issues
1. Clutch pedal returns...
For A, use two wrenches
For B, just go at it.
I actually have a 97 muself and have replaced it, and dont recall using any special tools, do you know how to daisy chain 2 wrenches together?
Charley
Heres a list that will work to help with mpg
Sc400(98-00)
Ls400
Sc430
Gs400
Supra auto tt
As far as torsen, i only know that stock soarer and mkiv supra tt auto work
What is a jza70?
Charley
ok,
well someone else gave the following torque specs for:
rear main seal plate 52in-lbs
flywheel ~75ft-lbs
pressure plate ~25ft-lbs
as for sealing rear main plate, toyota black FIPG will work
Charley
hello all,
in the middle of my r154 swap and decided to remove the rear main seal cover plate to replace the rear main seal and o-ring behind the plate, but now am wondering what should i use to seal it. it looks like there is some sort of foamy squishy grey stuff, but I am wondering if i...
Hello all,
Was searching but unable to find the part number for the rear main seal. Anything else I should change when swapping out the auto for 5 speed?
Thanks
Charley