milnersXcoupe
New Member
- Messages
- 95
- Location
- new paltz, new york . USA
-Nevermind-
-Nevermind-
Google'd 'King Engine Bearings' - thanks for the Tip !
-Nevermind-
Google'd 'King Engine Bearings' - thanks for the Tip !
Latest update guys.
Still no cnc heads, as our sponsor is so busy. So we ran with standard heads again last season just finished. Started back around the 7.4's and managed a 7.18 at he last meeting. Ran 4th overall in the Outlaws Championship.
Heads are junk though - cracks etc. So we will wait for the new heads. In the meantime my mentor John Zappia has convinced me to put some cubes into it. So I have new 3.85 pistons and liners ordered - and going from 9:1 right up to 11:1 comp. A new billet crank is being made by a Kiwi guy living in the USA - 3.75 stroke with normal width chev large journal big ends. That will give us 349 cubes! Should be pretty stout I reckon. Our car is always out like a rocket to half track but not the best in the second half - these mods should fix that.
Photos soon.
Pc
when do i get a drive ???Cribbj
You're right about that. We will actually be calling the engine an AERO Quad Cam, based on the Lexus. The only 1UZFE parts left will be the main bearings, and cam gears, belt and tensioner. All the rest has been modified.
PC