tt hilux.

[dean]

few blokes have seen the build of the tt lux. and the turbo mount on both side. im trying to keep the sleeper look so i don't want to mount them high so there bit outta the bonnet. im looking for pictures ideas anything that might be possible for hilux people out the they will know how tight it is.

 

[XR8tt]

Try two Subaru ball bearing [or similar] each side of the gear box, just behind bell housing...

Then one of these http://www.tiltonracing.com/content.php?page=list2&id=222&m=d
to return the oil back to rocker covers.. NO need to drill and tap sump.. Some fab up a surge type tank / sump for the oil to drain into then the above pump does it's work.. But it must be under turbo's to drain.. The drain pipe to sump must be under turbo with no more than 45* angle or oil will build up and blow through seals...
Doesn't do any damage, just heaps of smoke..
A single turbo such as the GT40/35 - 1.06 turbine A.R...
Is another option... Best to have [ported] internal gate to keep things simple [KISS] The headers are about the right size ..
The cold side out of turbo can be reinforced plastic flex pipe to intercooler up front if you want.. DON'T forget you need some sort of boost readable ECU for it to work properly...

 

[v8soarer_1991]

subaru td04 turbos

Peter's tt 1uz
http://soarercentral.com/sc-forum/messages/121829/235147.html?1209727750

 

[XR8tt]

Yep VF 24 / VF30 etc.. Keep the dump pipe as LARGE as possible...