Need donor 1UZFE crank for measurements for stroker billet crank

[AeroPC]

Guys

I am asking for some assistance with a donor 1UZFE crank for measurements. We are doing a stroker billet crank to blown alky spec. Would only need it for a few weeks.

In the Santa Ana area in California.

Marine Crankshaft Inc.
2155 S. Grand Avenue • Santa Ana, CA 92705

Give me a buzz if you have one for sale or to borrow.

 

[4U2QUIK]

I'm up in salida, and I plan on doing the same thing sometime this year and I will be blueprinting a crank on my cmm. I don't have any problems sharing this info once I move on to that project.

 

[cribbj]

Hope this info will be shared once the crank is designed?

Now who's going to be the first to design/build a flatplane crank?

Kelfords are ready to do the cams.

Then we'll have a V8 that is as close to a Ferrari sound as can be

 

[stevechumo]

Hope this info will be shared once the crank is designed?

Now who's going to be the first to design/build a flatplane crank?

Kelfords are ready to do the cams.

Then we'll have a V8 that is as close to a Ferrari sound as can be

Ferrari sound, eh?

 

[AeroPC]

Crank

Look guys I researched the flat plane crank thing to death. I wanted the sound and other benefits, but for my application the vibration is a no go negative. I am sure it will be ok for normally aspirated race, and street turbo/blown tho.
Will share the crank design once finished.
PC

 

[cribbj]

Hear you Paul, the vibration is the biggest concern.

I don't think physics has changed at all since the Cosworth DFV.