Crambo
Member
- Messages
- 130
- Location
- Victoria Australia
The headers are mild steel, smooth pre bent, Mig welded and on the way to be black ceramic coated.
Started on an adaptor block to remount the oil filter on an angle to clear the engine crossmember.
Originally I expected to remote mount the filter but I see this as a better result, the flow and return to the filter is just over 3/4" so hoses would be fat.
Started on an adaptor block to remount the oil filter on an angle to clear the engine crossmember.
Originally I expected to remote mount the filter but I see this as a better result, the flow and return to the filter is just over 3/4" so hoses would be fat.