- Messages
- 1,108
- Location
- Russia, Moscow
Recently my 1uz developed noticeable coolant leak down there (plug p/n 11492-50010, replacement p/n 11492-20010)
Removed the plug, it had signs of black sealant
Grinded the remains of the sealant off with sandpaper, applied new sealant, reassembled
After a while I noticed the bloody leak again. I can't spot the exact leaky point but it's definitely somewhere near the bottom stud
Opinions, anyone?
p/s picture with the plug assembled
I suppose it may even leak from the stud, not the hole that's blocked by the plug
Removed the plug, it had signs of black sealant
Grinded the remains of the sealant off with sandpaper, applied new sealant, reassembled
After a while I noticed the bloody leak again. I can't spot the exact leaky point but it's definitely somewhere near the bottom stud
Opinions, anyone?
p/s picture with the plug assembled
I suppose it may even leak from the stud, not the hole that's blocked by the plug
Last edited: