M millsi New Member Messages 81 Location ipswich Apr 30, 2011 #1 Can the valve springs in the 1uz be changed without taking the heads off? I believe there is a special tool? cheers
Can the valve springs in the 1uz be changed without taking the heads off? I believe there is a special tool? cheers
Lextreme II Just call me "Lex" Messages 12,033 Location City of Halos Apr 30, 2011 #2 Yes u can.... no special tool. All u need it a compressor...
P pogoism9 New Member Messages 45 Location fredericksburg, va May 13, 2011 #4 Need to make sure your valve doesnt drop into the cylinder. Alot of people use that yellow nylon rope and stuff it down in thecylinder via the spark plug hole to keep the valve up.
Need to make sure your valve doesnt drop into the cylinder. Alot of people use that yellow nylon rope and stuff it down in thecylinder via the spark plug hole to keep the valve up.
ash New Member Messages 407 Location qld May 16, 2011 #5 just make up a air fitting, to put 100 psi into the cylinder, while the piston is at tdc the air will hold the valve up
just make up a air fitting, to put 100 psi into the cylinder, while the piston is at tdc the air will hold the valve up