7M Swap

[Lextreme II]

I am sure most of the Supraforums members have seen this, but some havent. JDMFantasy is a member of this forum too and this is his 1UZ going into his 7M Supra. Pretty creative intake.

 

[lowboost]

That looks awesome I might see if he can design me a manifold in the near future!

 

[supradude117]

Just gave me an intersting idea for an intake manifold of my own... Very nice though. Hope it fits under the hood.

(I'm sure he measured twice and welded once though :veryhappy

-Dave

 

[JDMfantasy]

I knew that pic looked familiar:veryhappy

The new manifold is actually shorter than the stock believe it or not. The coolant bridge was modified to allow for greater clearance of the TB's

We actually wont be using this manifold (we've got another design in mind, we just made this one up for fun) so if anyones interested.....

Hopefully this winter we'll start making some big progress!

 

[lowboost]

any progress on this manifold?

 

[Lextreme II]

JDM,

What if you use a 3" U Bend aluminum tube as your dual intake?

 

[JDMfantasy]

We were thinking about going in that direction, something similar to the manifold on the Top Secret 350Z, but opted for twin TB's instead.

Lowboost, we planned on using two stock 7M supra TB's (roughly 62mm's) for this manifold, but have pretty much stopped working on it for now as we have a ton of other manifolds to build.

Let me know if you're still interested at all.