I have aquired a GS131 crown engine to do a conversion in my girlfriends crown.
Everythings in there and have gotten to wiring and the 3rd plug suppled with the ecu doesnt have any wires.
I went looking for pinouts to make up a plug and all i can find are the 4 plug ECU pinouts.
This is a single ecu for both engine and transmission, there is no seperate ecu for the Transmission.
Also writern on the ECU is UCF10.
Any help would be much appreciated. Ive really hit a brick wall with this.
Thanks,
Nic Tauroa
Everythings in there and have gotten to wiring and the 3rd plug suppled with the ecu doesnt have any wires.
I went looking for pinouts to make up a plug and all i can find are the 4 plug ECU pinouts.
This is a single ecu for both engine and transmission, there is no seperate ecu for the Transmission.
Also writern on the ECU is UCF10.
Any help would be much appreciated. Ive really hit a brick wall with this.
Thanks,
Nic Tauroa