datjas
New Member
- Messages
- 40
- Location
- goldcoast qld australia
Hi all,I havnt seen alot on here in a while but due to some motorvation from converted's lexray i have decided to do a 1uz conversion after my 3.0 dieing not long after getiing my boat on the water.Ill post some build photos as i go any feedback appreciated to know if its worth continuing posting them.
These pictures are adapting the coupler for the leg using a drive block usually for ski boats where a drive shaft comes off this block,instead i got a small amount of machining done to use my old style coupler.Also i used an adapter plate to put a powerglide/turbo box since i have the chev/mercruiser bellhousing
These pictures are adapting the coupler for the leg using a drive block usually for ski boats where a drive shaft comes off this block,instead i got a small amount of machining done to use my old style coupler.Also i used an adapter plate to put a powerglide/turbo box since i have the chev/mercruiser bellhousing