drifty325i
New Member
- Messages
- 611
- Location
- christchurch,newzealand
Check these sites out, very interesting indeed and i feel they are quite accurate with there findings if you type in the correct info ie your excate weight and flywheel horsepower, obviously the true figures my diviate a little but i think this is pretty spot on
ITS ONLY ACURATE IF YOU USE THE CORRECT FIGURES NO GUESSES OK
This is my car:
DRIFTYS E30 V8
Power at Flywheel (BHP) : 340
Weight without Driver (KG) : 1250 that's including subs,spare wheel interior,1/4 gas etc
Power to Weight Ratio (BHP Per Ton) : 276.37
0 - 60 (Secs) : 4.31
0 - 100 (Secs) : 9.96
60 - 100 (Secs) : 5.65
Quarter Mile (Secs) : 12.57
Terminal Speed (MPH) : 112.35
Drag Strip Quarter Mile (Secs) : 12.47
Drag Strip Terminal Speed (MPH) : 113.64
STANDARD NEW E30 325I
Power at Flywheel (BHP) : 170 When new, less with age
Weight without Driver (KG) : 1200 Factory straight out of the box
Power to Weight Ratio (BHP Per Ton) : 143.94
0 - 60 (Secs) : 7.31
0 - 100 (Secs) : 20.60
60 - 100 (Secs) : 13.30
Quarter Mile (Secs) : 15.74 I think this is pretty much spot on for a healthy standard 325i
Terminal Speed (MPH) : 87.39
Drag Strip Quarter Mile (Secs) : 15.64
Drag Strip Terminal Speed (MPH) : 88.40
STANDARD 3.0 EURO E36 M3
Power at Flywheel (BHP) : 286 When new
Weight without Driver (KG) : 1510
Power to Weight Ratio (BHP Per Ton) : 192.44
0 - 60 (Secs) : 5.68
0 - 100 (Secs) : 13.79
60 - 100 (Secs) : 8.12
Quarter Mile (Secs) : 13.99
Terminal Speed (MPH) : 100.71
Drag Strip Quarter Mile (Secs) : 13.89
Drag Strip Terminal Speed (MPH) : 101.84
Here is the like guys enjoy
http://www.letstorquebhp.com/calculator.asp
Post up your figures guys! And remember no guesses lol
POSSIBLE STICKY????
ITS ONLY ACURATE IF YOU USE THE CORRECT FIGURES NO GUESSES OK
This is my car:
DRIFTYS E30 V8
Power at Flywheel (BHP) : 340
Weight without Driver (KG) : 1250 that's including subs,spare wheel interior,1/4 gas etc
Power to Weight Ratio (BHP Per Ton) : 276.37
0 - 60 (Secs) : 4.31
0 - 100 (Secs) : 9.96
60 - 100 (Secs) : 5.65
Quarter Mile (Secs) : 12.57
Terminal Speed (MPH) : 112.35
Drag Strip Quarter Mile (Secs) : 12.47
Drag Strip Terminal Speed (MPH) : 113.64
STANDARD NEW E30 325I
Power at Flywheel (BHP) : 170 When new, less with age
Weight without Driver (KG) : 1200 Factory straight out of the box
Power to Weight Ratio (BHP Per Ton) : 143.94
0 - 60 (Secs) : 7.31
0 - 100 (Secs) : 20.60
60 - 100 (Secs) : 13.30
Quarter Mile (Secs) : 15.74 I think this is pretty much spot on for a healthy standard 325i
Terminal Speed (MPH) : 87.39
Drag Strip Quarter Mile (Secs) : 15.64
Drag Strip Terminal Speed (MPH) : 88.40
STANDARD 3.0 EURO E36 M3
Power at Flywheel (BHP) : 286 When new
Weight without Driver (KG) : 1510
Power to Weight Ratio (BHP Per Ton) : 192.44
0 - 60 (Secs) : 5.68
0 - 100 (Secs) : 13.79
60 - 100 (Secs) : 8.12
Quarter Mile (Secs) : 13.99
Terminal Speed (MPH) : 100.71
Drag Strip Quarter Mile (Secs) : 13.89
Drag Strip Terminal Speed (MPH) : 101.84
Here is the like guys enjoy
http://www.letstorquebhp.com/calculator.asp
Post up your figures guys! And remember no guesses lol
POSSIBLE STICKY????