Recent content by bsee

Hi James, Can you tell me where to get 1gzfe engine in Msia? I m from Msia kl too! you can contact me through [email protected], Benjamin See is my name.

They were using it for stroker kit for the evo. When they install a 2.2l stroker kit for the evo. They will need to change the pistons. They ran out idea and also money. They went and search for the piston. Finally they found that 1uzfe pistons fits perfectly. Pin center is about 3mm...

v8 have 8 rods. 4 cylinder have 4 rods. if you divide the the 8 cylinder with hp, you will be getting 100hp on each rod. We have generate about 485hp on a 4cylinder engine. Which is 121.25 per rod. I got guys which which in their evo's, using 1uzfe pistons, they are making about 750hp...

The stock 1uzfe rod is very strong already. When i took out a 1uzfe rod they even thicker and feel that they have stronger material. I think the stock 1uzfe rod can last about 800hp no problem. We did about 500hp on 4agte without any problem.

The ecu will have these function: 3D" Fuel and Ignition maps. Configurable ignition and injection outputs to suit different applications Inputs for water temperature, air temperature, auxiliary temperature (eg turbo), manifold air pressure, throttle position, knock sensor, EGO (exhaust gas...

Thank for giving me a feedback. I keep that point in mind. Try not to compare with motec. Their ecu prices are too much in different. Although i know that my ecu has limited functions. My ecu is pretty affordable if you can compare to other brands around. I will keep upgrading the...

Any feedback??

Any feedback yet??

Get whipple, they are the best

Sorry! it is for stand alone computers only. No worries the ecu will be pretty much affordable to every one.

No it is a stand alone ones. Sorry! Found too many problems with the stock ecu's.

Just left click on the link and it will direct you to save the software automatically.

Hi guys! Need some oppinion on my new ecu software. Follow this link below for download of the software. http://www.geocities.com/bcq771/synecu.zip Create a folder call synecu and extract everything to the folder. After that run the program call synchron ecu manager. In the main screen...

Thank you! But there is not much LS400 from Japan actually, so it is pretty hard to get them.

Is there anyway to mod the crown 1uzfe into the ls400 car? what is needed to be done? I am not really familiar with LS 400.