bellhousing bolts

[Mat Grant]

Hi,

Please can anyone tell me the sizes of the bellhousing bolts? I've got a 1UZFE from a 1992 soarer, and a bullet cars bellhousing to go on it. Bullet say the standard bolts will fit.

I don't want to strip any threads trying to work it out with bolts I've got in thr garage, so if anyone knows that would be a big help.

Next question would be - where can I get a set? Need some soon so I can build up the drive train - then it's going to the guy making the engine mounts.

Any answers appreciated!

Cheers, Mat.

 

[cribbj]

The six top are M12x1.25, the four bottom ones are M10x1.25.

This post: http://www.lextreme.com/forums/showpost.php?p=71234&postcount=2 shows how long they need to be for the engine to mount on an engine stand. No idea how long they need to be for just the bellhousing.

 

[Mat Grant]

Hi,

Thanks for the info, regarding the bolt length - the depth in the block is

M12 bolts = 30mm depth of thread (in block)
M10 bolts = 22mm depth of thread (open end)

So the length of bolts you need is this plus the thickness of your bellhousing for each location.

Cheers, Mat.