MrE
New Member
- Messages
- 10
- Location
- Kent, England
Hi Guys,
Putting a LS 400 V8 in my LJ70, I would like to use the oil sensor thats in the sump and wire it to the now unused glow plug light in the dash. The sensor has 2 wires 1 brown and 1 green/brown?, do I give one wire 12v feed then use other wire to power the bulb, or is this another sensor like the oil pressure that has just an earth running through it?
Cheers
Mark....
Putting a LS 400 V8 in my LJ70, I would like to use the oil sensor thats in the sump and wire it to the now unused glow plug light in the dash. The sensor has 2 wires 1 brown and 1 green/brown?, do I give one wire 12v feed then use other wire to power the bulb, or is this another sensor like the oil pressure that has just an earth running through it?
Cheers
Mark....
