Hi all, I'm hoping someone on here might be able to help locate my car that was stolen form Tullamarine last night.
The vehicle was a 1981 short wheel base beige FJ40. Had a 4.0L Lexus V8 & 60 series 5 speed, power steering, front & rear air lockers, all engineered.
The vehicle is fairly...
Hi all, I have had a 1uz in my 40 series for about 2 years now and am almost on my second clutch. First one the center tore out of it and today the fingers on the pressure plate broke. I used the CRS kit and have had nothing but trouble with it from day one so I am looking at going auto.
What I...
Okay so here's my problem... 1UZ alternator light came on a few weeks back and at the same time smelt some smoke under the bonnet. Power steering pump had a slight leak so i thought that had gotten into the alt and killed it. So i rebuilt the pump and took the alt to be bench tested at the auto...
Looking for a 1uz power steering pump in good condition in melbourne, or that can be shipped to melbourne. If you can help out send an email to [email protected]
Cheers,
Adam.
Yeah thats a good idea, you would need to make it easily accessible to hook up the extra pipe for when its wet. I noticed a number off trucks at Tuff Truck had their regular air intake system with no snorkle, but for the mud stage they were ducting the intake into the cab/ onto the roof/ tray...
I am also interested in this - will be keen to see some pics of your setup once you get it sorted out. I have just put a 1UZ into my 40 series Landcruiser and at the moment i just have a pod filter on there to get by, but before i go offroad I want to get an airbox and snorkel made up. My old...
Does anyone know how to test if a coil is stuffed or not? I have done the procedures outlined in the pics below and i am getting 0.9 ohms on the primary coil when it should be 0.41 - 0.50 ohms. Does this mean my coils are stuffed? I get the same reading on both of them. The secondary coils are...
As above, i need a set for a 92 LS400 in Melbourne, Australia. I have a set here i can swap if need be. Don't know what they're off, but the code on them is '123'.
Email me at [email protected]
Thanks guys, the motor is from a 92 LS400. The ignitors in the picture are just the ones the wrecker gave me with the car. The 3 digit number is '123' so im assuming the number on the ignitors i need will be different...
Would you have some to suit Sideshow? What would they be worth with...
I have a 1uz which is from a 92 LS400 and am almost finished the conversion into my 4x4. Just noticed that the plugs in the loom for the ignitors look different to the plug on the ignitor body & won't fit together correctly. Or are they just a really tight fit? Do these differ from year to year...