Toyota - Lexus - Scion Exposition http://www.tlsexpo.net
May 14-15 2005
the event will be held in Chesapeake, VA in the Greenbrier section of the city (a stone's throw from Interstate 64) with accommodations within walking distances from the site.
the dyno portion of the event has...
the easiest way to remove the starter is from the top... this is by removing the whole intake manifold by just unbolting the lower runners from the head and by doing this so you will have access to the starter and it will be held by two long bolts for the starter and a couple of small bolts for...
these set-ups has been run long time already on factory supercharged MK1 MR2 w/ 4agze and also the previa w/ 2tzfze engine to name a few...
isn't it there someone here fabricating a twin supercharger using two toyota units w/ this clutch set-up
as my experience with my toyota powered cars... I have run mobil1 synthetic with toyota filters... never have used other filters rather than toyota filters
I have a 1985 MA67 Supra... with a 4.10 LSD... the MK67 diff is not that strong as a MKIV supra diff... it is a 7.5 2 pinion LSD if your car is equipped with LSD... well the best upgrade we have done is to get a taller diff ratio to the like of 3.727 3.50 3.42 3.24... so to the likes of a 1UZFE...
so what is the recipe for this fine art of machinery...
this car has been a talk already at celicasupra.com
as per looking at your engine bay... I see a air/water intercooler
alright guys... to confirm on the power increase on the new 4.7L 2UZFE VVT-i engine for the 2005 Tundras... the engine is now producing 285 hp... test drive results on the seat of the pants it is very strong and pulls harder compared to the 2004 model... and also with the 5 speed automatic it is...
That us why I always check any headers, manifolds that I order for true flatness
has encountered a not true turbo manifold on a B18C1 engine for a Honda that I was building for my buddy
The R154 to W58 lenght is different... the R154 is longer but I am not sure by how much... and I am with the 3 different shifter position in the W58 box as per the R154
R154 tranny has a bellhousing thaat will bolt in a JZ block... 1JZGTE on JZA70 (MK3 Supra 2.5 1JZGTE)
The MK2 supra came stock with rack and pinion.... as per having the driver side exhaust manifold would have to be modified for it is a tight fit on the stock units... might have fabricate on a one-off headers for the MK2 supra (shorty)