Recent content by podge

got my trigger wheel in the post yesterday so a big thanks goes out to david and everyone else that has been involved with creating this fair play fellas a real nice piece of kit will keep you updated as to my progress with the ms and my mk1 mr2 thanks again podge:bigok:

thanks for the help on this one its most appreciated all the best podge

ive already been offered two sets of supra ones but rx`s are like rocking horse poo around here so ill prob go the supra route what mod do you have to do to the injectors and what cc are they all the best podge

ill be controling it all with a megasquirt running wasted spark

hi fellas was wondering if the 440 injectors out of the 3sgte will fit in the 1uzfe im upgrading my mk1.5 mr2 to 550cc injectors so will have a spare set to go on the 1u. oh yes the 1u will be running two ct26a turbos thanks in advance podge

im from wales dont know if there is anyone else on here from wales but im puting a 1uz into a mk1 mr2 and straping on a pair of ct26a`s running it north south through an audi gearbox ive completed one mk1 swap and that was putting a 3sgte into a mk1 but that was childsplay compaired to this...

i think hel see you putin the 1uz in and thatl be it i gotta have 1 of those hope the swap goes well and keep us posted podge:biggthumpup:

hi steve are you tony`s brother if so i know him off two brutal its myself and paul putting a 1uz into mk1 mr2`s all the best with your swap podge

im having one built for myself at the moment and in that im having the extras instaled to run the coilpacks

if your using megasquirt v3 you dont need to use the edis setup as it has the ability to run coilpacks. so if you just get two ford mondao coilpacks the v3 megasquirt will run them

ive been looking at the audi 016 transaxle, for the price and reading i dont think you can go much wrong ive been trawling the gt40 forums for info and it apears the 944 turbo box is the audi 016

or theres two of us in the uk fitting the 1uz into aw11`s 1100kg that should make it ok for you to use a 1uz over there

hi fellas theres two of us in the uk going to megasquirt the 1uz unit in our mk1 mr2 aw11`s with the v3 board you dont need to use the ford edis 8 setup as you can trigger the coils from the v3 board direct also you can use the standard 12-1 crank wheel and sensor to trigger it ill dig out the...

hi there was wondering if you make an adapter plate for the 1uz to a toyota e153 as found in the mr2 turbos all the best podge