Search results

Thought I'd get back and update, for anyones future reference I bought a 4 pulse/rev speed sender unit of Sideshow, wired the banger up and took it for a spin, now what happened was, it would up shift and only downshift sometimes:twak: sometimes it would bog in top until you stopped...

Right, so the speed sensor in there, is a different signal, the one that is in there went to the speedo and is altered and goes back to the ECT?? So I need to fit a different sender unit and wire it straight to the ECT as opposed to going via the speedo? which obviously cant as it ain't...

Ahh think you've sparked my brain, there was a Violet and white from both the ECT plug and out of the engine harness, that wasn't joined, it must have looped through the dash somewhere, will join him up and see

Gotta go, be back on in an hour, if works quite, thanks very much for the info, its great

Posted same time:ninja: So I need another speed sensor and hook it up, via SS1 and SSC, but one with correct pulses, don't need cable drive as it will be electronic speedo

http://members.optusnet.com.au/~russell.koehne/Crown/UZS131ECTwire.pdf I used this Ahh, OVERDRIVE speed sensor:439: I'm thinking I need speed sensor 1 speed sensor 2 and speed sensor common? where do they run via? I'm leaving for night shift and cant look at the car again till thurs...

Yep, Crown with 2 ECU,s It has a speed sensor on the diagram still in place, then a few others marked on the drawing going into the car, what,s altering the signal? Trying to find the diagram I used to help explain

Yep, there is a speed sensor, comes up with the main loom from the engine and auto, unless its farked of course It didn't not change, it didn't engage second

Righto, I've roughed the loom up for the motor and auto in this jag, its out of a Crown, using the factory auto, take it for a spin and it only selects first, when it try's to up change, it stops engine brakeing, but still only has first gear, usuall not pulling in second/third forward clutchs...

Thats a No, joys of living in the sticks:theyareontome:

Engined, yes it has an engine :kidding:

Dunno, I reckon mine with the LS1 I put in it is alright:saroll: And there is even room left in the engine bay:laughing:

I've been dropped off a project, wire a 1UZ FE to an XJ6, so far I've roughed the loom up and give it a start, still to test to make sure the auto ECU stuff works, has a high idle but haven't let it warm up yet