Toyota 1UZ V8 Top Gun Max 300 LPG Plug Lead Set - suit Turbo or high performance application, especially LPG injected Turbo (which is what I bought them for).
This set cost $250 at Repco, super thin 5mm thick that will fit in the original covers and look factory, unlike the usual thick...
Hi
I'm after a 1uz Alternator and plug for a conversion. Not worried if it's a crown or soarer, just after a smaller one than the one with my Holden motor. Would love to get it with the plug and some wiring to wire it in if possible. In Canberra, happy to pay postage.
Cheers
Eddy
The fans don't seem really strong unless that's 6.5 amps each, then they should be ok. The main thing is that they seal against the radiator well to suck the air properly and spin the right way (don't laugh, just reversed a mates that was wired back to front and pushing the air back through the...
crs sump
Good find Rod, I saw a similar thing with the flange plate when i bought one from CRS, and other holes at the front didn't line up, that's why I sent it back! http://www.lextreme.com/forums/showthread.php?t=12558&highlight=crs+sump
Ed
Laser cutting
Agree, but when I talked to Acuform at Hume (in Canberra) they were happy to make one for $120 including plate and scanning off an original sump which was good value. I had another quote in Queanbeyan for $300 for the same thing hand measured!
Acuform - maps.google.com.au...
sump flange
CRS normally only sell a complete sump. Glenn (from CRS) was on here and offered me the flange only for $120 inc post however I decided to send it back as it was out on a couple of holes (as in my pics).
I did get a price of $110 (good price) locally for one scanned from a...
CRS Sump
Thanks Rod, that's what I found. Two extra holes at the back, front corner hole was out. Cheers Ed
BTW - getting close to rego - sorting out my sump oil leak and then I can send it off for a tune.
I'm redoing the sump on my 1uz and tried a flange from CRS in Victoria as I've used there parts before. What surprised me was that the flange had different bolt patterns to my two motors? CRS were great and accepted the plate back and refunded my money but were as surprised as me that it didn't...
a340 pt2
This was what I worked out, ignore colours of some wires as they are mine - but info should help. Attached a pic I found on Lextreme.
Tiptronic Box
Tip active Double Red Connected - Manual mode
Automatic Double Red Disconnected - Automatic
Torque Conv Double...
a340 wiring
This was an article I found here by lambo, it may help. I'm using a tiptronic box from the usa http://radesignsproducts.com/aboutus.aspx . There's a lot of info on this site, but takes some chasing. Have a read of the article below then feel free to ask questions
By LAMBO -...
2" rule - has more problems
The motoring council and car clubs in the ACT have complained about the ridiculous nature of this law as ACT RTA are looking at it. I've been involved in the protest.
Rod, there is a way around it for some- the words are 50mm from the trim height - defined as...