Search results

Hi Craig, I have sent you an email. Thanks

i'm chasing the same thing if anyone had any luck

does anyone have a cad file for a 1UZ to T400 Adapter plate? or any precise measurements of the bolt patterns?

i have finally got a photo of the plug if anyone has a connector that plugs in to this or knows where i can get one.

I am chasing the main elctrical plug for the auto gear box, the one that controls the solenoids. if anybody has one or knows where i can buy one. Thanks

if anyone needs this info in the future the wirring is Blue = 12V Black = GND Green = Signal

Sideshow, i have a controller from KDOG to control the gearbox. and am using a PS1000 for the engine Bushwaker, the wires dont have any stripes on them. Thanks again for the help.

the gearbox i have is missing that speed sensor, it looks like it is set up to drive a cable. and i dont have a loom to trace back. thanks anyway

im in the process of installing a 1uz into a holden HX 1 tonner. am using a haltech ECU and i have a A340e gearbox from a crown. i need to connect the speed sensor to the ecu. i believe the speed sensor is the 32PPR type it has a part number of 89544-30020 the wire colours are Blue, Green and...

what was changed between the early and late engines to increase the compression ratio from 10:1 to 10.4:1, was it the heads or pistons or something else?

you said "2UZFE also have negative Piston Deck Clearance" does that mean the 1uzfe has a negative piston deck clearance just in your deck height formula you calculated for the 1uz you used a positive figure. i don't have an engine apart to measure at the moment and i just want to make sure i get...