Search results

hey guys, im putting a 1uz into my 97 hilux. the G52 that was originaly in there had a cabel speedo the new r151 box thats goin in there is electric, is there any way to make it work? cheers

hi, im trying to plumb up my 1uz stering pump to a hilux steering box.on the pump there is 2 inlets and 2 out outlets. the smaller one being at the rear. ive caped off the front section and intend to use the rear. is this the rite thing to do? im wondering if the front section will seize as it...

hi, im trying to plumb up my 1uz stering pump to a hilux steering box.on the pump there is 2 inlets and 2 out outlets. the smaller one being at the rear. ive caped off the front section and intend to use the rear. is this the rite thing to do? im wondering if the front section will seize as it...

hi, just finished fabricating my own set of headers for my hilux. whats the most effective coating i can get done on them to prevent them from rusting. Even the heat proof paint u can by still does burn off. cromeing would be nice but a bit pricy. ive heard nickle plating will still rust? any...

hi, im trying to plumb my hilux steering box to the 1uz powersteering pump. on the pump i think there is to inlets which are around 1 inch and 3/4 and just have a oring seal with one bolt holding the pipe in place and 2 out lets which are threaded and smaller in diamiter around 1/2 inch. which...

on the 1uz motor there is a black plastic pipe before the throttle body, under neath this pipe there is another black plastic airbox that is connected to the pipe, does anyone know what it is for and if u need to keep it. thanks

<P>hi, </P> <P>im puting a 1uz in my hilux and a problem i have come across is that the oil filter hits on the chassie rail and im unable to un screw it. Instead of spending 200 bux on a relocation kit which is still about 70mm long when u have the 2 elbow bends for the oil lines on is there a...

hey gys. im useing a 1uz fe in my hilux converson. my snorkle is on the passenger side and the throttle body on the 1uz is on the driver side. ive seen pictures wherer the whole top intake manifold is reversed around so that the throtle body is on the passenger side thus making it alot easier...

hi all, Im in the early stages of doing a conversion into my hilux with a 1uzfe. Im running a manual box with stock computer and the motor is bone stock straigt off a front cut from a soarer that i bought. im told it has around 250hp at the crank in its stock form. Whats the most reliable, value...

hello, im doing a conversion into a hilux with a 1uz. i bought a front cut from a soarer and ive just got the engine out now so my next stage is to get all the wireing done so i can put it into the hilux. i want to get everything good to go b4 it goes in because of the limited space between the...

im doing a conversion with a 1uz into my hilux 4wd. it was originaly desiel, ive heard of people running an external electric fuel pump via a serge tank to make it work as i want to use the same desiel tank. one guy inpaticular used a Holden VL 6cyl fuel pump and says it does the job. does the...