If you got splits you can eithe mount the tweeters in the kick panelsand angle them towrds the opposite head rest as a guide, or modfiy your A pillars to fit them in, the best thing you can do is install the mids in the door, and then get the tweeters on a long piece of spearker wire and some...
DEpending on what amp you have will depend on whether you can use the speaker wires as you signal wires. Not to many aps these days have line level in so you would need a line level convertor which will convert the signal to RCA plugs so you can get the signal in to your amp.
Its good to see...
Sounds like the regulator on the alternaotrs buggered. I just replaced the alternator on my 91 LS400. RRP is bout $630 or there abouts for an aftermarket one. It depends as to how buggered it is as to whether it can be repaired or replaced.
Ive found a guy in sydney who can make custom billet grilles for the LS400, the only thing is that he needs a car to make it. im up in brisbane so was wondering if there is anyne in sydney who'd like to get a billet grill for there 91 LS400 and then he could make up 2 so i could get one to...
Im pretty sure the HU does not have an Auxillary in. So unfortunatly not with the factory HU. But heyre a plenty of aftermarket ones that are available that will alow youto do this.
What about the radio transmitter Ipod :)
To replace the factory sub with a after market one is pointless unless you find the right sub. When you install a sub in to the factory location it is in a free air aplication, and the sub is designed specifcally for the type of operation. Most aftermarket subs are designed for enclosures, be it...
The power rating on the back of a speaker means absolutly nothing in terms of how good its going to sound or how loud its going to go. A speaker doesnt put out power. An amplifier does. The number on the back of a speaker is how much ower they can handle from an amplifier and on cheaper brands...
Id be interested in some coil overs for a 91 LS400, im easy on brand tein or whatevers good. Is this for international or just local. If its local, would you be able to post up part numbers so we could source them for ourrselves